KZR's Bikes of the Month for 2024

Carburetors Mikuni 36

More
02 Mar 2022 06:35 - 02 Mar 2022 06:37 #863067 by Machine
Carburetors Mikuni 36 was created by Machine
Hopefully someone’s got advice. I am currently running engine Set up. 1197CC. 13 to 1 compression. 22 WebCam, ported head, big Valves,springs  36 Mikuni flats 
Murdoch transmission and lock up clutch. Dyna 2000,Here’s a $10,000 question. Bike pulls hard Not complaining. I am currently running a 137.5 main jet Needle and Excelerator pump seem to be perfect. Your thoughts on the main jet size. I tried to get a plug reading But running 110 Sunoco hard to get a accurate reading. seems to be close but not set on kill on top end
Thanks in advance
Last edit: 02 Mar 2022 06:37 by Machine.

Please Log in or Create an account to join the conversation.

More
03 Mar 2022 17:30 - 03 Mar 2022 17:33 #863149 by Injected
Replied by Injected on topic Carburetors Mikuni 36
If you just started this engine your not going to see much plug color without putting some miles on, run it rich till the rings are seated then do some plug chops.
If its too dangerous to do the plug chops because of a high MPH situation then take it to a dyno to record a few runs.
Most dyno services have AFR sniffers so they will tell you bang on how its running right thru the RPM range.
Don't jeopardize your safety for some tan plugs. I would rather have black plugs than a speeding ticket or accident any day.

Do you mean 122 WebCam? (.460" lift)
Last edit: 03 Mar 2022 17:33 by Injected.

Please Log in or Create an account to join the conversation.

  • Calhoun
  • Offline
  • User
  • Hayabusa= I ride to the strip club in flip flops
More
18 Mar 2022 10:00 #863983 by Calhoun
Replied by Calhoun on topic Carburetors Mikuni 36
What is it not doing correctly?  What is your average daily temperature and elevation? 
 

80 IT175, 84 XL200, XT250, 95 ST1100 96 xr650l (30k miles),kz1000, KX250 97'
Last and most important 93 KX500.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.