- Posts: 51
- Thank you received: 2
1977 kz1000 a1 carb holder
- Gdizard
- Topic Author
- Offline
- User
- 12/03/1954
29 Jan 2022 08:42 - 29 Jan 2022 08:44 #861362
by Gdizard
1977 kz1000 a1 carb holder was created by Gdizard
CAN ANYONE REMEMBER DO THE CARB HOLDERS REQUIRE A CLAMP OR DOES THE CARB OUTLET JUST FITS SNUG ENOUGH WITHOUT A CLAMP?
THIS IS THE FRONT SIDE OF THE CARBS ATTACHING TO THE CARB HOLDERS THAT ARE ATTACHED TO THE HEAD.
THIS IS THE FRONT SIDE OF THE CARBS ATTACHING TO THE CARB HOLDERS THAT ARE ATTACHED TO THE HEAD.
Last edit: 29 Jan 2022 08:44 by Gdizard.
Please Log in or Create an account to join the conversation.
- Warren3200gt
-
- Offline
- User
29 Jan 2022 09:22 #861365
by Warren3200gt
Z1000J2 somewhat modified!
Replied by Warren3200gt on topic 1977 kz1000 a1 carb holder
Yes, they must be an airtight seal. There clamps available from the usual sources. Do not be tempted to use jubilee type clips as the will cut into the rubber and render the rubbers useless.
Z1000J2 somewhat modified!
Please Log in or Create an account to join the conversation.
- Gdizard
- Topic Author
- Offline
- User
- 12/03/1954
29 Jan 2022 09:32 #861368
by Gdizard
Replied by Gdizard on topic 1977 kz1000 a1 carb holder
LIKE THESE SIR ?
Please Log in or Create an account to join the conversation.
- Mikaw
-
- Offline
- Sustaining Member
- Warren3200gt
-
- Offline
- User
29 Jan 2022 09:36 #861371
by Warren3200gt
Z1000J2 somewhat modified!
Replied by Warren3200gt on topic 1977 kz1000 a1 carb holder
Yes, just make sure they are for your engine/carb size. All z's use them. The smaller the engine capacity the smaller the clip dia.
Z1000J2 somewhat modified!
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.