KZR's Bikes of the Month for 2024

Carb question/identification.

  • epiphalactic
  • Topic Author
  • Offline
  • User
More
30 Jan 2022 18:56 #861509 by epiphalactic
Replied by epiphalactic on topic Carb question/identification.
Yes that is exactly what I was talking about, sorry I should have been more clear.

I guess I was mainly just seeing if I were to machine a set which I will probably do, if I could essentially just measure the inside of the fuel tee, and be in the ballpark without trying to hit it dead nuts.  
Thank you! 

Please Log in or Create an account to join the conversation.

  • epiphalactic
  • Topic Author
  • Offline
  • User
More
30 Jan 2022 19:04 #861510 by epiphalactic
Replied by epiphalactic on topic Carb question/identification.
Perfect, I was actually looking through and it looks as if somebody has made the one between the carbs, in the same way you did.  

Looks like they essentially got the correct diameter piece, drilled and screwed in then soldered a little nipple onto it.  

I am a tool maker, so I have access to all of the machinery that would be necessary, so I will probably just pop some stock on the lathe and turn down some new straight connectors, as well as replace the middle t with one I've machines, just for looks sake.  
 And yes when I said earlier mine has two of the t's, it does have two of the plastic teas, and then of course that center tee between the carbs.  
So since I have a lot of scrap, I will probably make it out of some 7075.  
 
Attachments:

Please Log in or Create an account to join the conversation.

More
30 Jan 2022 20:49 #861512 by Nessism

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.