KZR's Bikes of the Month for 2024

Intake carb boot manifold manometer spigot tap off vent

More
05 Sep 2021 03:15 #854841 by kz_1000a
Intake carb boot manifold manometer spigot tap off vent was created by kz_1000a
Hey, (‘77 kz1000a) I have changed OEM 26 mm round slides to RS 34 flat slides.
I would now like to dynamically check sync.
The intake manifolds supplied that I am using do not have a vent for connecting a manometer type tool to.
Has anyone here modified intake rubber boots to include a vent as in OEM pics?

 

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
05 Sep 2021 04:48 #854843 by Scirocco
Replied by Scirocco on topic Intake carb boot manifold manometer spigot tap off vent
The vaccum ports are on the carb body intake side.

 
My 1975 Z 1 B 900 Project

www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
The following user(s) said Thank You: martin_csr, kz_1000a

Please Log in or Create an account to join the conversation.

More
05 Sep 2021 18:12 - 05 Sep 2021 18:13 #854884 by kz_1000a
Replied by kz_1000a on topic Intake carb boot manifold manometer spigot tap off vent
Well...  that was a major oversight on my behalf!
Is one of these ports a master port?
( I usually calibrate my non-mercury 4 column carb synchroniser to a master vacuum port )
Last edit: 05 Sep 2021 18:13 by kz_1000a.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.