- Posts: 5
- Thank you received: 0
1979 kz650SR slide carb question
- BnB650SR
- Topic Author
- Offline
- User
26 Jun 2021 16:36 - 26 Jun 2021 18:15 #850784
by BnB650SR
1979 kz650SR slide carb question was created by BnB650SR
Hey all, first post. I apologize if it’s been covered but can’t find anywhere. My concern is this small notch in the bottom of each of the slides. A. Is it suppose to be there? B. When tuning the slides, do I want my .8-1mm gap to be from inside that notch or from the bottom of the slide? The picture was taken from the engine side of the carbs. Thanks for any help!
Last edit: 26 Jun 2021 18:15 by Street Fighter LTD.
Please Log in or Create an account to join the conversation.
- Mikaw
-
- Offline
- Sustaining Member
26 Jun 2021 20:21 - 26 Jun 2021 20:23 #850791
by Mikaw
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Replied by Mikaw on topic 1979 kz650SR slide carb question
Yes they are supposed to be there. You bench sync for the air box side. Read the included for procedure.
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Last edit: 26 Jun 2021 20:23 by Mikaw.
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.