- Posts: 555
- Thank you received: 212
Can't install carb boots
- blipco
-
- Offline
- User
- 2002 KZ1000P
14 Mar 2021 21:14 #844937
by blipco
"Swim against the current, even a dead fish can go with the flow"-somebody (I forget Who)
Replied by blipco on topic Can't install carb boots
I just did installed my carbs two days ago and they popped right in with two semi-forceful rocking motions. All my worrying was for naught. But troof be told I bought new carb holders.
It was $29 dollars per OEM holder but the painful part was the o rings at like 8 bucks each! Sure, I could have matched them up with something from the hardware store but they may not have been made from the secret formula that the OEM rings are made of. So about $150 for shiny new carb holders and the dang overpriced o rings (should have been 50 cents each).
Anyways, I don't have to think about it for another twenty five years.
It was $29 dollars per OEM holder but the painful part was the o rings at like 8 bucks each! Sure, I could have matched them up with something from the hardware store but they may not have been made from the secret formula that the OEM rings are made of. So about $150 for shiny new carb holders and the dang overpriced o rings (should have been 50 cents each).
Anyways, I don't have to think about it for another twenty five years.
"Swim against the current, even a dead fish can go with the flow"-somebody (I forget Who)
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.