KZR's Bikes of the Month for 2024

Tiny little O-rings on mixture screws

More
16 Feb 2021 19:18 #843576 by ckahleer
Tiny little O-rings on mixture screws was created by ckahleer
I should of asked this question 10 years ago. Every time I pick up a fixer upper, I spend way too much time and frustration trying to get those little o-rings out of the carburetors.
Any tricks or tools I should be using?
What size are they? Where do I get a bunch of them?
Thanks
94 KE100
81 CM200t
82 KZ305
85 VF1100c

Please Log in or Create an account to join the conversation.

More
16 Feb 2021 19:20 #843577 by Nessism
Replied by Nessism on topic Tiny little O-rings on mixture screws
What year, bike, carbs, are we talking about here?
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

More
17 Feb 2021 06:10 - 17 Feb 2021 06:36 #843590 by martin_csr
Replied by martin_csr on topic Tiny little O-rings on mixture screws
No eBay APP ID and/or Cert ID defined in Kunena configurationPartzilla has part numbers. Z1Enterprises.com has o-ring dimensions.

The EB o-rings below should fit my carburetor pilot adjusting screw orifices, since the dimensions match.
I didn't do an exhaustive search & viton might be preferable to nitrile. note: seller doesn't say how many o-rings are in a pack.
EB: Othmro Nitrile Rubber O-Rings 5.5mm OD 2.5mm ID 1.5mm Width, Metric Buna-N Pack
1981 KZ650 Competition Sports and Road
Last edit: 17 Feb 2021 06:36 by martin_csr.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.