KZR's Bikes of the Month for 2024

CV 36 help

More
15 May 2021 08:30 #848476 by Peanuthead
Replied by Peanuthead on topic CV 36 help
I'm refering to the snorkel that attaches to the air box. I've always referred to it as a snot box for some reason. I have an OE air filter in it now.

Please Log in or Create an account to join the conversation.

More
17 May 2021 19:51 #848653 by Peanuthead
Replied by Peanuthead on topic CV 36 help
Got a little bit of time in the garage this afternoon. I fired up Rusty, let her get all nice and warm, and played with the air box a bit. Resting my hand over the snorkel the idle smoothed out and the RPMs were mostly smooth too. I tried a little bit of foam padding and that seemed to work too. So I decided to take a spin.

With the extra foam, she bogged and stalled out so I tossed them away. Test ride#2 she ran good! Got up to 45 mph and 3rd gear! I'm pretty sure she could go faster but not doing that in my neighborhood.  Rode her down to the gas station to reward her with some fresh fuel too.  I did realize that the idle is kinda low all I'm gonna fix that later. 

Please Log in or Create an account to join the conversation.

More
18 May 2021 06:10 #848676 by TexasKZ
Replied by TexasKZ on topic CV 36 help
Just to be sure, you do have parts 2, 3, and 4 in the diagram? The snorkel fits snugly, does not flop up and down, and seals well against the main assembly? The carbs will be sensitive to anything out of order there.

www.partzilla.com/catalog/kawasaki/motor...a3/air-cleaner-80-a1

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

More
18 May 2021 07:03 - 18 May 2021 07:04 #848678 by Peanuthead
Replied by Peanuthead on topic CV 36 help

Just to be sure, you do have parts 2, 3, and 4 in the diagram? The snorkel fits snugly, does not flop up and down, and seals well against the main assembly? The carbs will be sensitive to anything out of order there.

www.partzilla.com/catalog/kawasaki/motor...a3/air-cleaner-80-a1
Correct.  I do not, however, have a factory seal on the filter case OR the tube on the bottom of the air box (#14).  I used some 1/4" sticky foam I had laying around on the air box.  I might remove that and try putting it on the filter case.  
Last edit: 18 May 2021 07:04 by Peanuthead.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.