KZR's Bikes of the Month for 2024

Jetting Advice Please :)

More
11 Jun 2006 13:08 #53715 by rdhussey
Jetting Advice Please :) was created by rdhussey
I've just completed the rebuild of a 1982 KZ750 motroe with stock carbs. I Totally cleaned them inside so they are working optimally.

I installed pods and will have a very open exhaust sysem. I am wondering how I should modify the jets, change the settings, and adjust them.

Any input will be appreciated.

Right now, it idles at 2700 with teh choke on and dies if I apply the throttle or let off the choke at all.

THANKS!!!!

Please Log in or Create an account to join the conversation.

More
12 Jun 2006 07:31 #53895 by wiredgeorge
Replied by wiredgeorge on topic Jetting Advice Please :)
If they idle at 2700 rpm and won't come off choke, I suspect they may not be working optimally! What kind of carbs would these be? Keihin CV34 or BS34 Mikuni? Do you have the stock airbox on the bike and stock pipes?

wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
13 Jun 2006 18:02 #54327 by JR
Replied by JR on topic Jetting Advice Please :)
If your carbs are Keihin CV34s then take a look at the picture below and the bike in my signature which is probably somewhat similar to yours. The pic may point you in the right direction. Stock version of my 135 jet is 125.
I have heard though that these jets can be hard to find.

Good luck


1980 kz750E1, Delkevic exhaust
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.