KZR's Bikes of the Month for 2024

Fine Tuning

More
24 May 2006 20:18 #49902 by dgbrooks
Fine Tuning was created by dgbrooks
Hi everyone! I'm working on tuning the carb, and I'm noticing a couple things when excelerating:

1) Slight hesitation, then I get going; and
2) Slight backfiring....little pops

What are these symtoms of? By the way, it's a '76 KZ900.

Thanks!

D

Post edited by: dgbrooks, at: 2006/05/24 23:19

Please Log in or Create an account to join the conversation.

More
25 May 2006 06:42 #49975 by wiredgeorge
Replied by wiredgeorge on topic Fine Tuning
D wrote:

1) Slight hesitation, then I get going; and
2) Slight backfiring....little pops

What are these symtoms of?

ONE - Improper jetting or adjustment of the air screws

TWO - Cleaning needed or an air leak; probably in the pilot circuit but possibly in the intake manifolds or vacuum caps.

wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
25 May 2006 11:19 #50023 by thedegnans
Replied by thedegnans on topic Fine Tuning
We are having a simaler problem with our 83 550LTD. My husband is the mechanic, so I am relaying what I understand of the situation. We recently rebuilt the carbs, and have a slight hesitation when reving the engine (as we would do to accelerate quickly on the road) and it is often to the point of stalling. We have tried re-setting the floats, and using 4 gauges to check the vacum in the chambers. We have new rubber pipes from the air cleaner, but the spring clamps are not in yet. Would the lack of clamps make such a difference? Any help would be appriciated.

Please Log in or Create an account to join the conversation.

More
25 May 2006 15:15 #50073 by KZReeder
Replied by KZReeder on topic Fine Tuning
George,
Can you elaborate on the pilot circuit leak? My bike is running really well but pops on occasion through carbs when it's cold.

I've got new intake boots and clamps and carbs have been gone through and have new pilot and main jets in them... was wondering if I should go up one washer on the needle?

Thanks,
Claude

Please Log in or Create an account to join the conversation.

More
25 May 2006 16:27 #50094 by dgbrooks
Replied by dgbrooks on topic Fine Tuning
Thanks for the advice!

Please Log in or Create an account to join the conversation.

More
26 May 2006 07:29 #50224 by wiredgeorge
Replied by wiredgeorge on topic Fine Tuning
We have at least three different threads swimming around in this thread. PLEASE start a new thread to discuss your issues if you didn't start this one! Jumping in with your questions muddies the original poster's questions and just causes confusion. It is called THREAD HIJACKING!

I am certainly happy and willing to always toss in my $.02 but don't want to add to Duane's confusion by answering other folks questions in this thread.

wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
26 May 2006 10:01 #50260 by KZReeder
Replied by KZReeder on topic Fine Tuning
Dang it!:whistle: I was hoping I could sneak that in there...;)

I'll start another thread. :blush:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.