84 zn700 vacuum

all the vacuum lines are off, does anyone have a diagram co i can hook up these carbs correctly?

there are 4 vacume ports going from left to right #1 and #4 get connected to the AIR system(valve cover) #2 goes to the petcock #3 gets plugged or capped

Thanks, I'm going to run it like that possibly tonight when I get off of work (11pm) which the wife won't like. Or tomorrow, I'll let you know how it works out for me. I still need to get some spark though. Thanks Again!

Post edited by: scirocco17, at: 2006/05/19 10:54

agawam is correct but to clarify, 1&4 go to a tee fitting which has a hose coming off it and THAT hose goes into the vacuum switch which operates the reed valves (inside the valve cover).

OK I went out early this morning excited to play motorcycles and I discovered that I left out a few things. There are more than 4 hose nipples on the carbs. There are actually 7. so I snapped some pics and numbered them up. I'm not the sharpest crayon in the box sometimes, but hopefully theres no way this can go wrong and all hoses will be accounted for! Yay!

Im new here and I guess you cant upload pics to the site so I have to host them on my webshots which means you have to click below to see them, sorry guys.

Photo#1 community.webshots.com/photo/548933797/2...33350059435507IuZLTz
Photo#2
community.webshots.com/photo/548933797/2...54660059435507DpsTli



So there they are, Kinda. Please tell me where these lines go #'s 1-7. Thanks!!

Post edited by: scirocco17, at: 2006/05/19 10:52

OK so i think i got them to work, the pictures, but they are scattered throughout the post now. I'm getting the hang of it though....

I'm pretty sure #6 is the fuel line. Am I right?

Post edited by: scirocco17, at: 2006/05/19 10:59

If you go to my web site, you will find some pics that will help you hook up your carburetors. 1-4 ARE VACCUM ports. I have already told you how to hook these up.

Sweet your website was CRAZY helpful and explained all that carb stuff really well! THANKS A MILLION:cheer:

your #s 5 & 7 are vents for the fuel bowls #6 is fuel inlet

Post edited by: agawam, at: 2006/05/20 00:28