KZR's Bikes of the Month for 2024

Lots of vibration...

More
15 May 2006 11:26 #47428 by Suprum
Lots of vibration... was created by Suprum
I just had my carbs cleaned and syncronized. The cold start problem i was having is now gone...Woo hoo!
But, i have noticed an excess of vibration and a loss of power at the top end.

Any thoughts?

Thanks

Please Log in or Create an account to join the conversation.

More
15 May 2006 11:40 #47429 by Fossil
Replied by Fossil on topic Lots of vibration...
I'ld go back and see whoever did your carb work and explain the problem. Sounds like a sync or maybe even a fuel starvation problem. How do the plugs look? Are any of your exhaust pipes running cooler than the others? Does the bike sound right?

Please Log in or Create an account to join the conversation.

More
15 May 2006 11:40 #47431 by anarki650
Replied by anarki650 on topic Lots of vibration...
Not sure what kind of set up you're running, but I had a noticable loss of power in the high r's on my 77 kz650b1 until I changed the primary jets up a step. Not sure why it'd have done that to you after cleaning and synching, but my problem stemmed from the wrong jet sizes. Hope it helps.

09 Kawasaki ER6n
77 kz650b1 cafe rebirth project
"Being shot out of a cannon will always be better than being squeezed out of a tube, that's why God made fast motorcycles..."
Dr. Hunter S. Thompson
Omaha NE

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.