11012-1128 plug over pilot jet no longer available

No eBay APP ID and/or Cert ID defined in Kunena configurationOriginal design as per ebay listing. :huh: See:


A similar adaptation (of 920661087) for the BS34 may be in order...easier to extract, and reuse vs. replace. :kiss: See:
www.cmsnl.com/search/partnumber.php?spbp...61087&spbpmodelcode=

No eBay APP ID and/or Cert ID defined in Kunena configurationyou might try searching ebay for the part CAP,POLYESTER  11012-1128

Nice work BLibecap. Looks looks good.

Good to know you have them available if needed. 

 

$10 each.  They look nice but pricy.  I'll make brass ones for that price.

Nessim, a couple of years ago you offered to fabricate some of the plugs/caps. Still in the business? what would you charge to make a couple of these from brass today?

Mad Anthony wrote:

Nessim, a couple of years ago you offered to fabricate some of the plugs/caps. Still in the business? what would you charge to make a couple of these from brass today?

If you just need two, I may be able to find you a couple of decent used plugs.

Yes I only need two. Are you talking about the OEM polyester plugs? ... or brass? Mine OEM plugs are so brittle I was thinking brass might be better. How did those work out? 

Nessism wrote:

Mad Anthony wrote:

Nessim, a couple of years ago you offered to fabricate some of the plugs/caps. Still in the business? what would you charge to make a couple of these from brass today?

If you just need two, I may be able to find you a couple of decent used plugs.
 

I know those post is old, but i came across it after I freaked after losing one of my plugs. Nessism, are you still able to acquire/make/obtain these plugs? I am desperate to locate some. Please let me know. Thanks.

SnyperX wrote:

Nessism wrote:

Mad Anthony wrote:

Nessim, a couple of years ago you offered to fabricate some of the plugs/caps. Still in the business? what would you charge to make a couple of these from brass today?

If you just need two, I may be able to find you a couple of decent used plugs.

 

I know those post is old, but i came across it after I freaked after losing one of my plugs. Nessism, are you still able to acquire/make/obtain these plugs? I am desperate to locate some. Please let me know. Thanks.

How many do you need?

 How many do you need?

I only lost one, but they all look pretty sad. So one for sure, but wishlist is to replace all four:-)

SnyperX wrote:

 How many do you need?

I only lost one, but they all look pretty sad. So one for sure, but wishlist is to replace all four:-)

Checked my spares box, and the only pieces I have, have the top broken off.  I could lathe a set, but they won't be cheap.  
BTW, where are you getting all the various O-rings for the carbs?  And be sure to ungang the carbs during your rebuild.  I guarantee that the O-rings on the fuel Tee and transfer tubes are hard as a rock, and the only way to renew them, is to break the set apart. 

Nessism wrote:

SnyperX wrote:

 How many do you need?

I only lost one, but they all look pretty sad. So one for sure, but wishlist is to replace all four:-)

Checked my spares box, and the only pieces I have, have the top broken off.  I could lathe a set, but they won't be cheap.  
BTW, where are you getting all the various O-rings for the carbs?  And be sure to ungang the carbs during your rebuild.  I guarantee that the O-rings on the fuel Tee and transfer tubes are hard as a rock, and the only way to renew them, is to break the set apart. 

I am only using the K&L kits at the moment for the rebuild. I know you have your o-ring kits. How do you PM someone on this forum? I can’t find it.