KZR's Bikes of the Month for 2024

Wont start without starting fluid, Why ?

More
17 Feb 2006 17:33 #24574 by gpzrox
Replied by gpzrox on topic Wont start without starting fluid, Why ?
Hairdrier should work great, pulled the stickers right off of my 84GPZ.

Strange, you have just about the same problem that I do, except for the sooty black plugs. And mine is bone stock. Under 45 degrees, it won't start if it has sat, like overnight or while I was at work(parked in the shade). Usually though I let it sit in the sun all day, it'll fire right up. If it is in a garage overnight, that helps. If it is raining, it helps. Haven't tried starting fluid, but bet it would help.

Slowly working my way through the culprits, I gotta try the coil mod, probably the same way that people run relays on their car headlights.

If I miraculously figure something out, then I'll let ya know.

84 GPZ750. Modded with stock Kawasaki parts: ZR-7 shock, ZX-6 coils, GPZ1100 throttle, EN454 brake, GPZ900 fuse box, etc. and non stock: Ken Sears mirrors, K&N filter, Pirelli Sport Demons.

Please Log in or Create an account to join the conversation.

More
17 Feb 2006 19:19 #24592 by OKC_Kent
Replied by OKC_Kent on topic Wont start without starting fluid, Why ?
Hey guys,
I spent a few minutes in the Archive tonight. Click the button up in the blue bar on top of this page. A few riders have had the cold starting problems like you.

if you enter "cold starting" in the box, and check "subject only" you will get 3-4 ideas on what to try.

Good luck!

Oklahoma City, OK
78 KZ650 B2 82,000+ miles

Please Log in or Create an account to join the conversation.

More
19 Feb 2006 15:06 #24957 by gpzrox
Replied by gpzrox on topic Wont start without starting fluid, Why ?
Looks like we are on to my culprit: compression check showed low 100 numbers, and the subsequent leak down indicated hissing from valves: time for the valve cover to come off and look-see at the valve clearances.

Being a 30+K miles/22 year old motor, I'd put even money on valve clearance OR valve guides, but I know which one I am hoping for. I haven't been using oil, so that should be a plus on the compression check.

Now that I think about it, I forgot to teaspoon of oil each cylinder and see what happens. :S.

Ah well, got time until the valve cover gasket comes in....

84 GPZ750. Modded with stock Kawasaki parts: ZR-7 shock, ZX-6 coils, GPZ1100 throttle, EN454 brake, GPZ900 fuse box, etc. and non stock: Ken Sears mirrors, K&N filter, Pirelli Sport Demons.

Please Log in or Create an account to join the conversation.

  • Tower_Monkey1
  • Topic Author
  • Offline
  • User
More
22 Feb 2006 11:50 #25633 by Tower_Monkey1
Replied by Tower_Monkey1 on topic Wont start without starting fluid, Why ?
Ok guys I finally figured it out. I cant believe it, it started with sooty dry black plugs and ran great. Came back to the garage and checked the plugs and they were clean as could be. It pulls the front wheel off the ground with very little effort. It idles smooth at about 900-1,000 rpm. The real test will be in the morning, after it has sit in a cold garage all night... Wayne

78 KZ650C2 Dyna ignition and coils,Pod filters,4-1 Kerker,CBR Tail Light,Drilled front dics,Custom front fender,1/4 fairing.

Please Log in or Create an account to join the conversation.

More
22 Feb 2006 12:19 #25645 by OKC_Kent
Replied by OKC_Kent on topic Wont start without starting fluid, Why ?
X X

Those are crossed fingers !

:laugh:

Oklahoma City, OK
78 KZ650 B2 82,000+ miles

Please Log in or Create an account to join the conversation.

More
22 Feb 2006 12:29 #25650 by BARNEYHYPHEN
Replied by BARNEYHYPHEN on topic Wont start without starting fluid, Why ?
So what was it?

Please Log in or Create an account to join the conversation.

More
22 Feb 2006 16:46 #25713 by MaddMaxx
Replied by MaddMaxx on topic Wont start without starting fluid, Why ?
Hey man at least yours starts. The guy I bought mine from had replaced the air box with individual k&n's and if it runs it sputters and pops, but it hasnt even done that for a week.

Please Log in or Create an account to join the conversation.

  • Tower_Monkey1
  • Topic Author
  • Offline
  • User
More
23 Feb 2006 06:19 #25835 by Tower_Monkey1
Replied by Tower_Monkey1 on topic Wont start without starting fluid, Why ?
I went to the garage this morning as one last test to see if it would start. It started right up with just the choke. I pulled the carbs yesterday and re adjusted the float level. my feeling is that it wasent getting fuel to the choke tube and thats why it wouldnt start without using starting fluid. But now its fixxed. Thanks to all who helped in the precess... Wayne

78 KZ650C2 Dyna ignition and coils,Pod filters,4-1 Kerker,CBR Tail Light,Drilled front dics,Custom front fender,1/4 fairing.

Please Log in or Create an account to join the conversation.

More
23 Feb 2006 08:51 #25887 by Rickman
Replied by Rickman on topic Wont start without starting fluid, Why ?
golf claps, bra'! good job!

1983 KZ1100-L1 "LTD Shaft"
Wiseco 10.5:1 1171 piston kit, bored by APE
Dyna 2000, Dyna S, Dyna grey coils, WG coil power mod, CB900 starter

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.