KZR's Bikes of the Month for 2024

Jet change after Using POD filters

More
15 Feb 2006 17:53 #24140 by svcc2006
Jet change after Using POD filters was created by svcc2006
I am converting from an airbox to pod air filters so I'll need bigger gas jets on my KZ 400. Can anyone tell me the exact jet needed?

Please Log in or Create an account to join the conversation.

More
15 Feb 2006 18:27 #24149 by OKC_Kent
Replied by OKC_Kent on topic Jet change after Using POD filters
Probably not without some more information. Do you know what jet is in there now? And then there's more.
Oklahoma City, OK
78 KZ650 B2 82,000+ miles

Please Log in or Create an account to join the conversation.

More
16 Feb 2006 05:31 #24238 by wiredgeorge
Replied by wiredgeorge on topic Jet change after Using POD filters
Put your year/model in your signature (and location as well) and you will get more specific help. You need to bump both the secondary main jets and main jets if you run pods else you will have flat spots; especially if you are using a non-stock exhaust system or have removed the baffles in your exhaust. You might want to mention what your current jetting and exhuast set up are for more specific answers as Kent mentioned!
wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
16 Feb 2006 21:01 #24399 by BRGMGBGT
Replied by BRGMGBGT on topic Jet change after Using POD filters
Also where you live, altitude?
oops, Wiredgeorge already got that one.

Post edited by: BRGMGBGT, at: 2006/02/17 00:04

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.