Suzuki cv carbs fit KZ1000???

ok. found a coupleof sites about the gs carbs,bs34ss carbs. i see that they all have the choke in the center. my set has a pull knob on the left for the choke. i measured the head side of the carbs, they are 34's but i can't find a site that has these carbs with this style pull choke.

need some help with id of these carbs,

PLEASE!!!!! ANYONE.

i will try and post a pic of them

The bs34ss you just purchased have a side pull choke?
They came this way on some years of the police kz1000.

Slide should move freely. If you lift it it should drop quickly.
If you lift it and cover the large port over the intake it shoul drop slowly.

GS1000 manual is here omma.edebris.com/manuals/

I'm trying to put together an archive of manuals so folks don't have to wait weeks to find a used paper copy.

Aside from jetting and the way the 'choke' rod 'user interface' is set up, i've not noticed any difference in these carbs on my gs1000 or kz1000p.

Kawasaki BS34SS with side pull diagrams...

assembly
carb

-Duck

Post edited by: Duck, at: 2006/03/07 11:04

duck, thank you those are it!!!!!!!!o knew some one would come to my rescue,

thank you very much!!!!!!!

ya know come to thin of it i don't think that those are the ones i have. they don't have any diaprams on the out side of the carb bodies. wiredgeorge is thinking that they are off of the kz1000j motor. does some one have a pic of these carbs off a 1000j motor.

please !!!!!!!!

i figured out what i have. they are off a 82 kz1000j1 or j2 motor. they have the coasting enrichener plunger on the side. so what do yo all think of these carbs.

i have a u2u to wiredgeorge, but want to know if any one is usung these also. and do they need a vacuum pet cock or can i stay with gravity style.

need more help, please!!!!!!

thanks

The carbs in your ebay link look just like the bs34ss setup on my gs1000gt

The carbs at buykawasaki.com link are for 87 police and look just like the carbs on my 87 police engine.

The two sets look the same aside from the choke pull mechanism.

-Duck