KZR's Bikes of the Month for 2024

JIS Screwdriver P2 or P3?

  • slmjim+Z1BEBE
  • Offline
  • User
  • Enjoy Life! IT HAS AN EXPIRATION DATE!
More
07 May 2019 04:57 #803436 by slmjim+Z1BEBE
Replied by slmjim+Z1BEBE on topic JIS Screwdriver P2 or P3?

rickycodie wrote: i've bought the Vessel Impacta P2 and P3 from amazon. My opinion is that both are needed items for any japanese bike.


^ +1 ^


Good Ridin'
slmjim & Z1BEBE
A biker looks at your engine and chrome.
A Rider looks at your odometer and tags.

1973 ('72 builds) Z1 x2
1974 Z1-A x2
1975 Z1-B x2
1993 CB 750 Nighthawk x2
2009 ST1300A

www.kawasaki-z-classik.com
An enthusiast's forum focused exclusively
on all things Z1, Z2 and KZ900.

Please Log in or Create an account to join the conversation.

More
24 Jun 2019 17:50 #806369 by ERIK814
Replied by ERIK814 on topic JIS Screwdriver P2 or P3?
I did a update in another post but will link it here since there were some follow-up:
www.kzrider.com/kunena/3-carburetor/6100...pped-carb-boot-screw

I had to use a vise grip to get the last stubborn screw out. I turned it very slow to not break the head off the shaft. I replaced all four screws with new JIS bolts from Z1 enterprises and used Loctite to seal. Everything has been running good so far.
1981 KZ 440 LTD Belt Drive (Late Model)
The following user(s) said Thank You: TexasKZ

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.