KZR's Bikes of the Month for 2024

drive sprocket holder

More
16 Feb 2015 17:22 - 16 Feb 2015 17:24 #661815 by Slade74
drive sprocket holder was created by Slade74
Just wanted to post a pic of my homegrown drive sprocket holder. I got the idea from an old thread on this forum, while researching ways to remove the front sprocket. The manual says to break the nut loose while holding the rear brake pedal, but My bike is currently an engine and frame on a bench right now, so that wasn't going to work.


Attachment 20150216_134421.jpg not found




It's, a piece of the old chain, bolted to a 4ft piece of 2x2 board. Chain end gets attached to the sprocket, and the other end got zip tied to the tail of the frame. Then I had both hands to use a 3 ft cheater bar on the nut.

In hind sight, if I wanted a multi-use tool, I should have used pipe for the handle. The sprocket teeth and the bolts in the wood did a number on the end pictured. It still got the job done though.
1981 KZ650 CSR
Attachments:
Last edit: 16 Feb 2015 17:24 by Slade74. Reason: attachment did not post

Please Log in or Create an account to join the conversation.

More
16 Feb 2015 17:26 #661816 by 650ed
Replied by 650ed on topic drive sprocket holder
Looks good to me. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
17 Feb 2015 02:48 #661841 by Patton
Replied by Patton on topic drive sprocket holder
Similar to --



Good Fortune! :)
1973 Z1
KZ900 LTD
Attachments:
The following user(s) said Thank You: Tyrell Corp

Please Log in or Create an account to join the conversation.

  • Rainman
  • Offline
  • Sustaining Member
  • and a little Kaw shall lead them
More
17 Feb 2015 05:34 - 17 Feb 2015 05:36 #661845 by Rainman
Replied by Rainman on topic drive sprocket holder
or another alternative for holding the drive sprocket





80 KZ750 H1 - the Kaw calf
79 KZ750 Twin - Miss Nov 2008 KZR calander
79 KZ750 Twin parts bike
78 KZ650 C2 Parts Bike
75 KZ400 Wife's old bike sold
81 KZ440 A2 LTD Wife's new bike
84 Honda 450 Rebel Wife's newest bike
Jim
Quincy,IL
Attachments:
Last edit: 17 Feb 2015 05:36 by Rainman.

Please Log in or Create an account to join the conversation.

More
17 Feb 2015 10:46 #661862 by !Seymore
Replied by !Seymore on topic drive sprocket holder
I needed to do something similar, to remove the orig front sprocket on my D2.

[img


Took this rig, some heat, a 3' cheater bar and both hands to break this nut loose! The swingarm was there to keep things from moving, but the hinge pins didn't fare to well! :(
C.
79' KZ650-D2 [fsm] (Max)
83' KZ750-F1 LTD [clymers] (Kay)
82' KZ1100-D1 Specter (another project)
78' KZ650-B2a (J&H, A Project)
91' KZ1000-P (P = parts)

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Offline
  • User
  • "You were made as well as we could make you"
More
18 Feb 2015 06:58 #661962 by Tyrell Corp
Replied by Tyrell Corp on topic drive sprocket holder
Good idea, I think drive sprockets bearings can be damaged with air tools.
1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.