indexing rod for CRANKSHAFT

Anyone know where I can get a 17mm indexing rod.

indexing rod for camshaft

that is crankshaft Einstein...... :woohoo:

yeah :woohoo:

No eBay APP ID and/or Cert ID defined in Kunena configurationHere.
This will do the job.
17mm ground bar.

Order`d that one thanks. Shipping was more than rod but owell

17mm drill rod from Grainger, McMaster Carr, etc, no shipping if you pick it up at a Grainger store.

www.travers.com/product.asp?RequestData=...=090212&catpage=1125

www.mcmaster.com/#8116K47

As usual I do not have time to wait and went and bought one from England and spent a few bucks, I work a lot and do not have time. Hope this thread helps someone later to get one much cheaper than i did, Thanks eveyone for your help. I had reserched or looked for this in the forum and found nothing .Thats why i changed it from camshaft .... just did it if others look and find this thread for help

We have all been there and done that....

peter1958 wrote: Order`d that one thanks. Shipping was more than rod but owell

I just posted that link to show what would be accurate enough and suitable for the job.
Was there not a US Ebay supplier for the ground bar ?

Not your fault. I just should have waited for a little before I went and bought it. Could have got up and drove to Paul b Zimmerman and picked one up there but after working all week i just want to get things done and just get it online.No big deal .

Got the rod yesterday and had a chance to go over tonight and it went through all so Crank is fine. Could`nt really look at the height of the pistons when I took the head off because it came off so easy and was not tight. Any how I don`t have time to put my welded crank in so this is good news. Larry has the head and I am just so glad he does. Cause this is going to rock when done. This is my everyday ride or when ever I get a chance. Colorado here we go!