KZR's Bikes of the Month for 2024

Vacuum system on an 81 kz650 csr

  • David Endres
  • Topic Author
  • Offline
  • User
More
23 Jul 2022 10:37 #870902 by David Endres
Vacuum system on an 81 kz650 csr was created by David Endres
Hello all,  I was wondering if any of you could give me some insight as to how to vent the crankcase when removing the air box and installing air pods.  Dave

Please Log in or Create an account to join the conversation.

More
23 Jul 2022 12:28 #870906 by Warren3200gt
Replied by Warren3200gt on topic Vacuum system on an 81 kz650 csr
There shouldn't be much positive pressure in the the crankcase so you could just remove the airbox and L shape tube or if you are worried you can run a tube from the crankcase up under the seat and vent it by the tail light.
Should worn you about cheap pods. Don't just don't or you'll be forever trying to get to run right. 
If you must have pods use top quality one of the correct size and fit. Kawasaki spent a lot of time and money getting good porformance using an airbox. If it ran better with pods they would have saved both time and money and fitted them from the outset. 


Z1000J2 somewhat modified!

Please Log in or Create an account to join the conversation.

More
23 Jul 2022 14:14 #870911 by 650ed
Replied by 650ed on topic Vacuum system on an 81 kz650 csr

Hello all,  I was wondering if any of you could give me some insight as to how to vent the crankcase when removing the air box and installing air pods.  Dave
 
Why would you do that?  Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
23 Jul 2022 15:11 - 23 Jul 2022 15:12 #870914 by Nessism
Replied by Nessism on topic Vacuum system on an 81 kz650 csr

Hello all,  I was wondering if any of you could give me some insight as to how to vent the crankcase when removing the air box and installing air pods.  Dave

Racers are required to run the crankcase breather hose into a catch can of some sort.  Otherwise, oil fog will spew out of the hose and go god knows where.  I recommend a PBR can strapped to the frame.  Doesn't get any cooler than that!  
Last edit: 23 Jul 2022 15:12 by Nessism.
The following user(s) said Thank You: 82KZ305Belt

Please Log in or Create an account to join the conversation.

  • David Endres
  • Topic Author
  • Offline
  • User
More
24 Jul 2022 12:25 #870946 by David Endres
Replied by David Endres on topic Vacuum system on an 81 kz650 csr
Thanks for the response.  I hear you about the air pods...I tried to stay stock but could not find the right right carb to airbox boots anywhere.  My concern was that the crankcase was vented by a small amount of vacuum from the air box but older bikes never did this.  I believe the issue about running right with pods stem from limited air coming from the box to the carbs and once the box is removed more air flows to the carbs ( not sure about this) but I have rejetted carbs before successfully so Im pretty sure I could manage that.  I do have one more question however.  Would I be correct to assume if I removed the diafram from the petcock, it would feed fuel to the carbs without limitation with the except of the off position?  I figure as long as I'm eliminating vacuum why not go all the way.  By the way, what is a PBR can?

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
24 Jul 2022 13:21 #870947 by Street Fighter LTD
Replied by Street Fighter LTD on topic Vacuum system on an 81 kz650 csr
PBR  in this case is likely Pabst Blue Ribbon   Beer   Drank many a PBR in my youth  
 Or if Navy  Patrol Boat River   Vietnam vintage


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
24 Jul 2022 13:45 #870949 by Scirocco
Replied by Scirocco on topic Vacuum system on an 81 kz650 csr
Today we use 

 
The following user(s) said Thank You: 82KZ305Belt

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.