KZR's Bikes of the Month for 2024

89 KZ1000P bobber?

More
25 Aug 2019 13:23 #809827 by jimdgreat1
89 KZ1000P bobber? was created by jimdgreat1
Figured I would just post here and put all the stuff I do to this bike in this thread. I'm really not going to change much I like the way I bought it. But as you know we rarely can leave our old bikes the way they are. There's always something we want to change. I did add a small case to the top of the rear fender and I plan to change the shocks for something that rides better. Need to add a drink holder and maybe a set of crash bars if I find them. Not sure what you would call this style but I figured bobber was pretty close. I like the floorboards but pretty much everything else of the police model has been stripped off. And now for some pictures. Auto correct changed bobber to Barbara so I guess she has a name now. :laugh:
Attachments:

Please Log in or Create an account to join the conversation.

More
25 Aug 2019 14:36 #809839 by riturbo
Replied by riturbo on topic 89 KZ1000P bobber?
Nice B)

Gpz 750 turbo The one I ride
Gpz 750 turbo Not finished
Gpz 750 turbo Not started
Gpz 550 1981
Gpz 550 1983
Bunch of other junk

Please Log in or Create an account to join the conversation.

More
25 Aug 2019 17:54 #809846 by jimdgreat1
Replied by jimdgreat1 on topic 89 KZ1000P bobber?
Hey just realized I can get a bottle of mixer in there too!

Please Log in or Create an account to join the conversation.

More
26 Aug 2019 17:10 #809896 by jimdgreat1
Replied by jimdgreat1 on topic 89 KZ1000P bobber?
Added a center stand and used Pattons penny trick to get the spring on.

Attachments:

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
26 Aug 2019 17:52 #809900 by Scirocco
Replied by Scirocco on topic 89 KZ1000P bobber?

jimdgreat1 wrote:
Added a center stand and used Pattons penny trick to get the spring on.


Did i (we) miss the penny trick??

Please Log in or Create an account to join the conversation.

More
26 Aug 2019 18:41 #809902 by TexasKZ
Replied by TexasKZ on topic 89 KZ1000P bobber?
It is pretty simple. Before disassembly, gather six or eight coins (depends n thickness of coins, length of spring, et c). With the stand fully deployed, insert a coin in every second or third coil. When you fold up the stand, the coins will prevent the spring from closing, and if there are enough coins, the spring will almost fall off.. Leave the coins in the spring until you are ready to install, then Bob's your uncle, it will slip on without a problem. Deploy the stand and remove the coins. Ride like a madman!

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
The following user(s) said Thank You: SWest, gordone, Scirocco

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 03:59 #809915 by jimdgreat1
Replied by jimdgreat1 on topic 89 KZ1000P bobber?
That's it. Though I had to bend the spring and push pennies in from each side. My spring wasn't on to begin with.
Need to find a rubber bumper for the up stop. There is a .550 diameter hole for one on the exhaust. Wonder where I'll find that?

Rode the klr650 to work today. Left Barbara on the stand.

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 06:37 #809923 by TexasKZ
Replied by TexasKZ on topic 89 KZ1000P bobber?
Do you know what model the mufflers came from? Maybe the bumper is still available for them.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 07:22 #809934 by jimdgreat1
Replied by jimdgreat1 on topic 89 KZ1000P bobber?
Not for sure. I think they are aftermarket pipes. Need to get some pics and try to read the name and number.

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 07:36 - 27 Aug 2019 07:37 #809937 by TexasKZ
Replied by TexasKZ on topic 89 KZ1000P bobber?
Those look like they are from an LTD. If so, that tab toward the front is a muffler mount. The stand bumper would be farther back, near the rear muffler mount. If those are from an LTD 1000, Partzilla lists the bumper as still available.

www.partzilla.com/catalog/kawasaki/motor...d-kz1000-k2/mufflers

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24
Last edit: 27 Aug 2019 07:37 by TexasKZ.
The following user(s) said Thank You: jimdgreat1

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 15:08 #809948 by jimdgreat1
Replied by jimdgreat1 on topic 89 KZ1000P bobber?
The dampener mount is underneath and behind the muffler like the diagram shows. Thanks.

Please Log in or Create an account to join the conversation.

More
27 Aug 2019 16:32 #809957 by baldy110
Replied by baldy110 on topic 89 KZ1000P bobber?
Looks like the muffler is bolted to the swingarm.
The following user(s) said Thank You: jimdgreat1

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.