KZR's Bikes of the Month for 2024

I have a decision to make....what would you guys do?

More
26 Jun 2019 18:13 #806531 by Webbie1

slmjim+Z1BEBE wrote:

Webbie1 wrote:

dpivas7 wrote: It's a national database called the National Crime Information Center (NCIC). It's run by the FBI I think.


So if it doesn't show up in there, it basically doesn't EXIST and there's no way to get the Vermont registration?
Warner


We checked the VIN on The Wounded Z every which way to Sunday. Called Washington state DMV with the VIN, last-licensed # of the WA plate and the sticker # on the plate from 1986. No records of the bike, PO's name, anything, because WA scrubs records after 20 yrs. (IIRC) of inactivity. We checked every database available to us and, had an old friend who manages a used car dealer branch check also. In most cases the VIN of a '73 Z1 is too short and/or configured wrong to even continue with an online form. The two checks that did complete returned null results.

We had a notarized bill of sale from the seller, showing purchase price, VIN, names & addresses of both buyer & seller, etc. That is a critical piece of paper for this process to work.

After contacting Bob, he sent us some VT DMV forms. A critical one has to be completed by a local LEO, that confirms the VIN. We contacted the local Sheriff's office, which is responsible for dealing with things like VIN records here in KY. We also obtained a KY title application.

A Sheriffs Deputy arrived at our house, inspected the VIN, then completed & signed his sections of both the VT registration application and the KY title application. Cost for VIN inspection - $15.00. Send completed VT forms & money for VT taxes & processing (~$229.00 IIRC) to VT.

Wait.

Couple weeks later a VT registration comes via USPS. A week after that, a VT plate arrives. At that point we could have ridden the bike legally anywhere in the U.S.

We then took the VT registration docs to our closest KY DMV branch. That is where the only glitch happened. The first chick we talked to was new & didn't understand how to do a title app from a VT registration. She got her supervisor, who showed her the two pages in the KY DMV manual describing how to proceed. Completed that process, paid KY taxes on what KY "thinks" a '73 Z1 is worth ($600.00 :laugh: ).

Wait.

Couple weeks later a crispy, fresh KY title appears in our mailbox for The Wounded Z.

Done.

Sounds like you have a chance for a nice bike at the right price. If you don't want it because of the lack of a title, we'd be interested in it at that price if it's close enough to KY.


Good Ridin'
slmjim & Z1BEBE


Now THAT'S the process that I would expect. The cop comes, looks at the VIN to see that it matches the paperwork, says "Yep, that's it" and the rest is just waiting. I don't know how Illinois views the Vermont registration, and Bob hadn't done an Illinois one yet but felt that they almost HAVE to honor it as Vermont doesn't issue titles for bikes over 15 years old. So you think that bike at $550 plus the costs of the title process is still a good deal?

Thanks for your reply,

Warner

1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F

Please Log in or Create an account to join the conversation.

  • slmjim+Z1BEBE
  • Offline
  • User
  • Enjoy Life! IT HAS AN EXPIRATION DATE!
More
26 Jun 2019 21:24 - 26 Jun 2019 21:26 #806539 by slmjim+Z1BEBE
Replied by slmjim+Z1BEBE on topic I have a decision to make....what would you guys do?

Webbie1 wrote: Now THAT'S the process that I would expect. The cop comes, looks at the VIN to see that it matches the paperwork, says "Yep, that's it" and the rest is just waiting. I don't know how Illinois views the Vermont registration, and Bob hadn't done an Illinoi one yet but felt that they almost HAVE to honor it as Vermont doesn't issue titles for bikes over 15 years old. So you think that bike at $550 plus the costs of the title process is still a good deal?

Thanks for your reply,

Warner


In your OP you stated the price as $900.00. Has it now dropped to $550.00?

The question you must answer for yourself is, do you want to do a full resto, or simply make it a nice vintage daily rider?

From the only pic, it looks to be reasonably complete & unmolested. What can't be seen are any hidden problems. Only you doing a due diligence inspection can answer that.

One way to look at it for us is, "can it be replaced with a modern equivalent for anywhere near the price?"

A full resto will set an owner back thousands of dollars. There's a case to be made for that. Doing a good refurb to make it into a clean, unrestored original will cost much much less, and likely be at least as satisfying if you plan on riding it frequently. You'll be lesss likely to stress about things like rain, a boot scuff on a sidecover, things like that. There's a case to be made for that, too.

So, to directly answer your question, we have to look at it as if we were buying it.

At $550.00 plus costs to obtain a KY title, it's a screaming deal, assuming there's no hidden catastrophes. Your costs may be different.

We would get the KY title, do a complete refurb, (not resto), leaving the finishes as is but very clean. Make sure it stops before we make it go with a full brake overhaul, then complete, by-the-book maintenance service - cleaning the carbs if necessary, replacing carb intake manifolds if needed, valve lash, timing, plugs... you know the drill. New rubber. Then joyride it for a few weeks. At this point your & our intentions likely diverge. We'd sell it for a decent profit. We really don't need another bike; we only do Z1's, and mostly just for fun. You might wish to keep it as a long-term daily rider. That being the case, you'd have an overbuilt & understressed, rock-solid motor in a reasonably stiff frame, riding on dated suspension. Only you can answer the question of if the overall experience, comfort, riding position and "fit", is right for you.

If you wish to do a full resto, don't plan on recouping what you spend, especially if you count your time as part of the cost. Do it just for the personal satisfaction of bringing an uncommon bike back to original condition.

Good Ridin'
slmjim & Z1BEBE

A biker looks at your engine and chrome.
A Rider looks at your odometer and tags.

1973 ('72 builds) Z1 x2
1974 Z1-A x2
1975 Z1-B x2
1993 CB 750 Nighthawk x2
2009 ST1300A

www.kawasaki-z-classik.com
An enthusiast's forum focused exclusively
on all things Z1, Z2 and KZ900.

Last edit: 26 Jun 2019 21:26 by slmjim+Z1BEBE.
The following user(s) said Thank You: Webbie1

Please Log in or Create an account to join the conversation.

More
26 Jun 2019 21:33 - 26 Jun 2019 21:35 #806540 by Webbie1

slmjim+Z1BEBE wrote:

Webbie1 wrote: Now THAT'S the process that I would expect. The cop comes, looks at the VIN to see that it matches the paperwork, says "Yep, that's it" and the rest is just waiting. I don't know how Illinois views the Vermont registration, and Bob hadn't done an Illinoi one yet but felt that they almost HAVE to honor it as Vermont doesn't issue titles for bikes over 15 years old. So you think that bike at $550 plus the costs of the title process is still a good deal?

Thanks for your reply,

Warner


In your OP you stated the price as $900.00. Has it now dropped to $550.00?

The question you must answer for yourself is, do you want to do a full resto, or simply make it a nice vintage daily rider?

From the only pic, it looks to be reasonably complete & unmolested. What can't be seen are any hidden problems. Only you doing a due diligence inspection can answer that.

One way to look at it for us is, "can it be replaced with a modern equivalent for anywhere near the price?"

A full resto will set an owner back thousands of dollars. There's a case to be made for that. Doing a good refurb to make it into a clean, unrestored original will cost much much less, and likely be at least as satisfying if you plan on riding it frequently. You'll be lesss likely to stress about things like rain, a boot scuff on a sidecover, things like that. There's a case to be made for that, too.

So, to directly answer your question, we have to look at it as if we were buying it.

At $550.00 plus costs to obtain a KY title, it's a screaming deal, assuming there's no hidden catastrophes. Your costs may be different.

We would get the KY title, do a complete refurb, (not resto), leaving the finishes as is but very clean. Make sure it stops before we make it go with a full brake overhaul, then complete, by-the-book maintenance service - cleaning the carbs if necessary, replacing carb intake manifolds if needed, valve lash, timing, plugs... you know the drill. New rubber. Then joyride it for a few weeks. At this point your & our intentions likely diverge. We'd sell it for a decent profit. We really don't need another bike; we only do Z1's, and mostly just for fun. You might wish to keep it as a long-term daily rider. That being the case, you'd have an overbuilt & understressed, rock-solid motor in a reasonably stiff frame, riding on dated suspension. Only you can answer the question of if the overall experience, comfort, riding position and "fit", is right for you.

If you wish to do a full resto, don't plan on recouping what you spend, especially if you count your time as part of the cost. Do it just for the personal satisfaction of bringing an uncommon bike back to original condition.

Good Ridin'
slmjim & Z1BEBE


Excellent advice! Pretty much echoes my thoughts. It dropped to $550 because I've paid him $550 so far and going to tell him that's all I'm willing to pay for it as it sits with no title. I think he'll accept that offer. Then the titling and plating process will cost about $250 so I'll be in $800 titled and licensed. I'm assuming that EVERYTHING needs to be gone through. That was my original thought going in. So it's going to take some work and money, but it'll be a fun project and I already converted my 4th bedroom into a climate controlled work space with a door directly to my garage. So if it's 100 and humid, or 20 below zero outside, I'll be working in something around 70 degrees. :)

Warner

1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F
Last edit: 26 Jun 2019 21:35 by Webbie1.

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 07:31 #806552 by Webbie1
As I mentioned, the guy with the KZ in question is a co worker, that I carpool to work and back with on Tuesdays and Thursdays. So I ran it by him today, what's involved with the Vermont registration, etc, and considering the work and expense involved, I'd offer him to keep the $550 that I've already paid him and take the bike. He's going to look for the title again and call the Wisconsin DMV again, in hopes of getting someone who can help. I believe that both of those efforts will be fruitless, and that I'll be picking up the bike. The Vermont part of the deal should cost me $48, plus $63 in taxes, plus whatever it costs me to get the VIN verification done. Let's say that totals $150. At that point I'm into the bike $700. Then I'll have to do the title transfer and plates in Illinois, which will be about $150, but I'd have to do that anyway. So basically I'm cutting $200 off the original price to make up for the hassle of getting the title sorted out. I think that's a good deal for me....

Warner

1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 11:53 #806569 by Nerdy

Webbie1 wrote: I already converted my 4th bedroom into a climate controlled work space with a door directly to my garage. So if it's 100 and humid, or 20 below zero outside, I'll be working in something around 70 degrees. :)



That's the way to do it! One of the POs of my house walled off a 12x20 section of the basement: it has double doors that open to the large concrete pad under the deck, so that's my workshop. Like yours, it's climate-controlled and I can go directly outside to paint something or whatever as needed. There's also a man-door so I can get from one part of the basement to the other.

Now I need to figure out how to store the riding mower and other stuff. Those things are taking up valuable bike and parts space. :)

1979 KZ400 Gifted to a couple of nephews
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R
The following user(s) said Thank You: Webbie1

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 12:19 #806571 by Oldjeep
AC unit in the detached garage works well too ;) My wife would be un amused if I was causing welding smoke or gasoline smell inside the house.

Chuck
81 KZ750 LTD
03 FZ1
www.oldjeep.com

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 12:22 #806572 by Webbie1

Nerdy wrote:

Webbie1 wrote: I already converted my 4th bedroom into a climate controlled work space with a door directly to my garage. So if it's 100 and humid, or 20 below zero outside, I'll be working in something around 70 degrees. :)



That's the way to do it! One of the POs of my house walled off a 12x20 section of the basement: it has double doors that open to the large concrete pad under the deck, so that's my workshop. Like yours, it's climate-controlled and I can go directly outside to paint something or whatever as needed. There's also a man-door so I can get from one part of the basement to the other.

Now I need to figure out how to store the riding mower and other stuff. Those things are taking up valuable bike and parts space. :)


I hear all of that! Haha. Yeah, I don't need a 4th bedroom. I DO need a climate controlled work / storage area. I had my graphics manager do some artwork for signs to put on my "shop" doors.

Warner


1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F
Attachments:

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 12:25 - 27 Jun 2019 12:32 #806573 by Webbie1

Oldjeep wrote: AC unit in the detached garage works well too ;) My wife would be un amused if I was causing welding smoke or gasoline smell inside the house.


I'm recently divorced and got my own house. As I was using my reciprocating saw to cut a hole in the bedroom wall, I muttered to myself, "I'm adding this to the list of shit you can do when you're single". :laugh: :laugh:

Having said that, anything smelly or smoky will be happening in the garage. I was able to purchase a nice compressor from my workplace for cheap (had to buy a single phase motor for it, but that's not too bad) and I built a Harbor Freight blast cabinet with dust deputy (and did the mods to the cabinet) so that will come in handy once I get started, too. There's a sturdy work bench there as well.

Warner



Warner

1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F
Attachments:
Last edit: 27 Jun 2019 12:32 by Webbie1.

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 12:39 #806575 by Webbie1
Still in progress.....but getting there. Have some real lighting, a winch to pull a bike up that ramp and into the room, a nice 8 foot table, and moved a rolling tool box into the room so I'm not going to the basement every time I need a tool. Have to finish trimming out the door but otherwise pretty satisfied with the space.

Warner


1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 14:55 - 27 Jun 2019 14:57 #806582 by Oldjeep
Why is all your garage stuff in that hallway? :woohoo:
In any event, make sure there is a fire door between that bedroom and rest of house.

Chuck
81 KZ750 LTD
03 FZ1
www.oldjeep.com
Last edit: 27 Jun 2019 14:57 by Oldjeep.

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 17:54 #806595 by Nerdy
Excellent sign! Your graphics person did a nice job.

1979 KZ400 Gifted to a couple of nephews
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R

Please Log in or Create an account to join the conversation.

More
27 Jun 2019 18:09 #806596 by Webbie1

Nerdy wrote: Excellent sign! Your graphics person did a nice job.


Thanks. Yeah, he's a professional. You should see some of the labels that he's designed for my company. (where I work, I don't OWN it!). He's also a biker...

Warner

1979 KZ1000 LTD, 1982 KZ1000 LTD, 1990 Honda CBR1000F

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.