- Posts: 1510
- Thank you received: 117
My GPz750 Resto-mod (pic heavy)
- StreetfighterKz
-
Topic Author
- Offline
- User
13 Sep 2016 10:18 #742081
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic Re:My GPz750 Resto-mod (pic heavy)
I did some heavy lifting (literally) the last couple weeks. The turbo engine is just different enough from the NA engine that I swapped them out so I could be sure everything fit 100%. This allowed me to find the correct offset front sprocket (the turbo has a 6mm longer output shaft) plus finalize my exhaust system.
While I had the engine out I went ahead an dressed up where I removed the lower front cross-member.
Once the turbo lump was in place, I moved on to the exhaust. (Don't mind the weld quality, as I'm using flux-core wire.) I thought it turned out nice and followed the lines of the frame and body work well.
Later, Doug
While I had the engine out I went ahead an dressed up where I removed the lower front cross-member.
Once the turbo lump was in place, I moved on to the exhaust. (Don't mind the weld quality, as I'm using flux-core wire.) I thought it turned out nice and followed the lines of the frame and body work well.
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.