- Posts: 79
- Thank you received: 9
1975 KZ 900 , ZRX Swingarm, 89 GSXR front end
- mark1122
-
- Offline
- User
- Keep twisting it
19 Feb 2012 10:16 #505016
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic 1975 KZ 900 , ZRX Swingarm, 89 GSXR front end
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Boostable
-
- Offline
- User
- tk11b40
-
Topic Author
- Offline
- User
- mark1122
-
- Offline
- User
- Keep twisting it
19 Feb 2012 16:21 #505095
by mark1122
good question Ted. but i'm sorry i dont have an answer for u.
i would pm kzrider, ( Stein Arild Sandnes) and ask him. Stien knows all.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic 1975 KZ 900 , ZRX Swingarm, 89 GSXR front end
tk11b40 wrote: Mark,
How hard would it be to get permission to use the KZR logo, I am betting they would sell out.
good question Ted. but i'm sorry i dont have an answer for u.
i would pm kzrider, ( Stein Arild Sandnes) and ask him. Stien knows all.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Bad Kaw
-
- Offline
- User
- Flying Squirell
- tk11b40
-
Topic Author
- Offline
- User
- ramtough_63
-
- Offline
- User
- 531blackbanshee
-
- Offline
- Vendor
- tk11b40
-
Topic Author
- Offline
- User
- tk11b40
-
Topic Author
- Offline
- User
05 Jun 2012 02:07 #526987
by tk11b40
Jetting:
Ok so so far no Dyno run.
Next question. The bike is really lean, the carbs are the stock 29MM round slides.
The bike has been bored to 998cc, has K&N Filters, and a Kerker header, Dyna ignition.
This has got to be a common set-up, so do any of you have a baseline jetting recipe I can copy?
The kicker is I live at 4500 foot elevation, but don't think that is going to make a huge differnce.
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Replied by tk11b40 on topic 1975 KZ 900 , ZRX Swingarm, 89 GSXR front end
Jetting:
Ok so so far no Dyno run.
Next question. The bike is really lean, the carbs are the stock 29MM round slides.
The bike has been bored to 998cc, has K&N Filters, and a Kerker header, Dyna ignition.
This has got to be a common set-up, so do any of you have a baseline jetting recipe I can copy?
The kicker is I live at 4500 foot elevation, but don't think that is going to make a huge differnce.
Suzuki GSXR 750 slabside
Ducati S4R
Husqvarna FE 350s
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.