kz1000 street/drag build

Replied by PLUMMEN on topic starting kz1000 build

also make sure your frame is straight before beefing it up too much its really hard to fix later

---

Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Replied by PLUMMEN on topic starting kz1000 build

mine is overkill as far as bracing goes,but your ltd frame was a lot stronger than my z1 so you should need as much work on yours.

---

Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Replied by jordan on topic starting kz1000 build

thanks plummen, your bike was kinda my inspiration for when i was working on my bracing

---

KZ810 streetfighter kz/gpz/gsxr
1983 gs1100e
1979 KZ 1000 1428 dragbike project
1974 kawasaki H1 500 sold
1972 Kawasaki s2 350-parted on ebay
1973 Kawasaki s2 350-parted on ebay
1982 kz750(sold)
1978 kz650 hardtail(sold)
1975 honda xl250-sold
1971 yamaha R5-sold
1982 yamaha xs400

Please Log in or Create an account to join the conversation.

Replied by PLUMMEN on topic starting kz1000 build

my frame was around 1/4" out of wack when we checked it before raking/bracing much of which im sure was caused by former fascination with wheelies !:laugh: the tubing on the newer frames is quite a bit stiffer,ive got a couple 79-80 ltd frames like yours someplace that are much stouter than a z1 even in stock form.

---

Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Old Man Rock on topic kz1000 street/drag build

Damn, I just love this young mans work...

I wish I had your knowledge at such a young age... Ah hell, who am I kidding, wish I had it now..... :laugh:

I can only imagine what you're going to be putting out once you get your degree... Make us old timers proud....

OMR

---

1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by PLUMMEN on topic starting kz1000 build

supercharged wrote:

Plummen - how do you recommend checking the frame?

for a quick check of steering head/backbone area i put a torpedo level on top of lower 2 backbone tubes to level frame ,then i lay another one on top of steering head to get an idea if its in the ball park.when in doubt stick it in a frame jig to make sure,thats why i took mine to topeka to have it checked since the 2 levels werent agreeing with each other close enough to suit me.

---

Still recovering,some days are better than others.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by jordan on topic starting kz1000 build

well thanks alot for all the good comments. Cant wait til this college thing is over and i get a job. Until then all i can do is piece things together slowly. I can't imagine what i would do with a steady flow of money:unsure:

---

KZ810 streetfighter kz/gpz/gsxr
1983 gs1100e
1979 KZ 1000 1428 dragbike project
1974 kawasaki H1 500 sold
1972 Kawasaki s2 350-parted on ebay
1973 Kawasaki s2 350-parted on ebay
1982 kz750(sold)
1978 kz650 hardtail(sold)
1975 honda xl250-sold
1971 yamaha R5-sold
1982 yamaha xs400

Please Log in or Create an account to join the conversation.

Replied by Makarth on topic starting kz1000 build

i know how you feel man. i basically have to wait until the riding season to put my bike back in the school's shop to continue working on it and now that im married it's increasingly harder to bring bike parts inside to work on.

---

1977 kz1000 - Megasquirt project @ 40% wiring, plenum, and exhaust<--(done!)

Please Log in or Create an account to join the conversation.