KZR's Bikes of the Month for 2024

To answer a few questions

More
11 Sep 2007 15:59 #170036 by steell
To answer a few questions was created by steell
Yes the 80 KZ750G side covers will fit the 76-79 KZ750B.

Yes the 83-85 GPz750 brake calipers will fit the 76-80 750 twin (and work "very" well)

Pic below is my 750B with 80 750G sidecovers, tank, and exhaust, with 96 GPz1100 master cylinder and 83 GPz750 calipers (and NOS Morris Mags). Actually, the frame is a 79 (bought it from Godsjestor), engine is an 82M, front end is 80G, electronic ignition is KZ440, and I have a pair of S&W rear shocks to put on it yet. A real conglomeration. :D

Still have to put the 80G tail on it, and buy a seat cover, and I think I'll buy another Mac chrome 2 into 1 exhaust for it.

My previous 79 750B and 80 750G had KZ1000 front calipers on them, the GPz750 calipers are far more effective, slide me all the way on top of the tank without trying real hard.

Oh yeah, I set the carbs (brass floats) by setting the floats at 1" from the bottom of the float to the bowl gasket, and just for grins I measured the fuel level and it was right in the middle of the specified range.

So the 1" works for brass floats anyway (on the 76-79 750 twins)





Post edited by: steell, at: 2007/09/11 19:20

KD9JUR
Attachments:

Please Log in or Create an account to join the conversation.

  • Biquetoast
  • Offline
  • User
  • King Jeremy The Wicked
More
11 Sep 2007 19:00 #170063 by Biquetoast
Replied by Biquetoast on topic To answer a few questions
steell wrote:

Yes....

Well, I guess that about covers it then!
Thanks...

...Oh, and I guess I'm not the only one who asks you questions via PM, because I didn't ask *all* of that... ;)

(1.) '75/'76 KZ400D - Commuter
(2.) '78 KZ750B3 Twin - Commuter
(3.) '78 KZ750B3 Twin - Commuter
(4.) '75 KZ400D - Sold
kz750twins.com

Please Log in or Create an account to join the conversation.

More
11 Sep 2007 19:11 #170072 by steell
Replied by steell on topic To answer a few questions
Nah, I get asked about stuff via PM all the time, especially about the 750 twins.

I don't mind, I just thought I'd show a pic of some of the stuff.

Just can't get over how well those brakes work, and they are single piston! It's like the bike just stops and I keep going :D

The 750 twin rotors are two inches larger in diameter than the GPz750 rotors, that extra leverage sure shows :woohoo:

KD9JUR

Please Log in or Create an account to join the conversation.

More
11 Sep 2007 23:35 #170110 by godsjester71
Replied by godsjester71 on topic To answer a few questions
You should try dual disk 6 piston brakes. I don't think I'll be able to have kids anymore. :D

Steve, how yah been? Those bikes couldn't have gone to a better home! Yah gotta take a minute and put that G tail section on there. I wanna take a ride on it now.

BTW, if anyone wants a 750GPz front end, I still have one laying around here, It'll go cheap unless i have to package it then it'll go at a real good price. Sorry for whoring my goods on yer thread. :whistle:

Please Log in or Create an account to join the conversation.

More
14 Sep 2007 05:25 #170500 by gpzinfested
Replied by gpzinfested on topic To answer a few questions
WOW that sure is a nice Camaro in that picture. That Car makes that WHOLE picture look good:laugh: :laugh: :laugh: :laugh: :laugh: :laugh: :laugh: Tell that guy man he sure takes good care of that Car:cheer:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.