- Posts: 1697
- Thank you received: 22
Cheep wheel lift
- Mark Wing
-
Topic Author
- Offline
- User
21 Jul 2007 22:33 #158557
by Mark Wing
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Cheep wheel lift was created by Mark Wing
I don't know if this should be in here but. I had this GPZ550 swing arm and I thought I could make a bike/wheel lift out of it. Well I did some cutting on the axle end, cut off a couple of brackets and spread it with a jack. I'm going to weld a piece of square tubing to it for the lever.
Mark
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Attachments:
Please Log in or Create an account to join the conversation.
- Mark Wing
-
Topic Author
- Offline
- User
21 Jul 2007 22:34 #158558
by Mark Wing
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Replied by Mark Wing on topic Cheep wheel lift
and this view
Post edited by: Mark Wing, at: 2007/07/22 01:35
Post edited by: Mark Wing, at: 2007/07/22 01:35
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Attachments:
Please Log in or Create an account to join the conversation.
If you like KZR Please consider making a donation. Thank you.
KZRider is free, but not without cost.
Please consider chipping in a few bucks to help cover the cost of running the KZR servers.