TOPIC:

So getting back on the KZ project...

In preparation for the rear swing arm I started fitting new rearsets. Ordered a set of Tarozzi rearsets from Fast from the Past and began mocking up everything.


Still need to incorporate the return spring and brake light switch into the bracket, and finalize the bracing and standoffs but the positioning works well so I'll call this a success.




Had to do a little bracket trimming but without much effort a quick mockup of the rear at ride height is starting to look good.

I'm drooling... I love how our 650 tails have that sexy kick up. Amazing work!

Also, what tail light are you using? Is it integrated with turn signals?

Thanks!

Tail light is from an 08 Ducati Monster and it only has brake light functionality. I need to make another bracket to get it further out on the tail. I'm using Oberon dual firing mini indicators front and back. They blend in but have great viability when in use.

oberon-performance.com/acatalog/Motorcycle_LED_Indicators.html

bike looks tuff !

good job,

leon

Looking good!

Looks amazing, it's definitely an inspiring build. I'll be stealing some ques from you when I get around to working on my new bike.

Got a little time to get the shock mounts from mock up to fully welded! The upper mount will have forward bracing that will be incorporated into the battery box, and I'm still deciding if I like the rear gusset plate - but the bike is back on the ground so I'm happy...

On to the pics:


The upper mount (not finished)


Showing the rear gusset plate that I'm not completely ready to make permanent:



Side view:


Lower link:

Nice looking work. Does that upper mount double as a trailer hitch for your boat? Ha ha just kidding. Looks very good.

very nice work bob.

well executed and plenty stout,imho.

looks like you tigged it up ?

keep us posted,

leon

531blackbanshee wrote: very nice work bob.

well executed and plenty stout,imho.

looks like you tigged it up ?

keep us posted,

leon

No kidding. I bet it was a lot of work to add that dimple for the shock bolt.

Great design and execution...you have to have a strong mount for a mono like that. Better safe than sorry for sure. If you put a brace on the front like the one on the back you might have a nice place for a tool kit?