- Posts: 1
- Thank you received: 0
Tail piece on 750 LTD
- rcampbell
- Topic Author
- Offline
- User
Less
More
29 Jan 2006 12:09 #20412
by rcampbell
Tail piece on 750 LTD was created by rcampbell
I was just wondering if a plastic tail piece from a Z1 or KZ1000 or similar would be able to fit on my 1981 4cyl 750 LTD. I want to give it a sportier look and may eventually do a front end and swing arm swap as well.
Please Log in or Create an account to join the conversation.
- DanOz7Five0
- Offline
- User
Less
More
- Posts: 347
- Thank you received: 0
04 Feb 2006 11:44 #21454
by DanOz7Five0
Replied by DanOz7Five0 on topic Tail piece on 750 LTD
The LTDs frame is different at the rear "hoop".
Thats not to say its not possible but its probably not a direct bolt on. The LTD frame is more rounded.
Thats not to say its not possible but its probably not a direct bolt on. The LTD frame is more rounded.
Please Log in or Create an account to join the conversation.
- rstnick
-
- Offline
- User
Less
More
- Posts: 4378
- Thank you received: 372
04 Feb 2006 12:19 #21462
by rstnick
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Replied by rstnick on topic Tail piece on 750 LTD
There's a pic of creedmiller's 750 on page 2 in the Gallery of 750s.
.
Post edited by: rstnick, at: 2006/02/04 15:20
.
Post edited by: rstnick, at: 2006/02/04 15:20
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Please Log in or Create an account to join the conversation.