- Posts: 4378
- Thank you received: 372
Rickman's on 650, and Blue!
- rstnick
- Topic Author
- Offline
- User
This is at the end of Fall:
.
Wheels off to do the bearings. I thought I may as well paint them while their off:
.
Wheels painted:
.
Headlight ears removed and Upper fairing support added:
.
Rickman fairing on. I will be painting it shortly:
.
I still need to mount turn signals and do some wire and cable routing. I lowered the tripple clamps on the forks as much as the Clubman bars would allow, approx 1/4 inch.
As well, the battery needs to go back in so I can test the KZ1000 Electronic Ign. set up and adjust timing if necessary. Also to make sure the WG coil wiring mod was done properly.
It's the end of January and we have above freezing temps here, as you can see by all the rain. Another month and Spring will almost be here!
And here in Blue.
Post edited by: rstnick, at: 2006/02/13 18:50
Rob
CANADA
Need a key for your Kawasaki? PM me
1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s
Please Log in or Create an account to join the conversation.
- RetroRiceRocketRider
- Offline
- User
- ...bring in the machine that goes PING!
- Posts: 1641
- Thank you received: 29
I remember when you scored the deal on that fairing. Did I tell you that I still hate you for not shipping it to me for my 650? :laugh:
Are you planning on painting it to match the rest of the bike, or repainting the whole bike again, or even a different color?
Please Log in or Create an account to join the conversation.
- Alex_KZ1K
- Offline
- User
- Posts: 105
- Thank you received: 1
Please Log in or Create an account to join the conversation.
- Tower_Monkey1
- Offline
- User
- Posts: 99
- Thank you received: 0
the 1000 guys are beating us to heck !!!!! Wayne
78 KZ650C2 Dyna ignition and coils,Pod filters,4-1 Kerker,CBR Tail Light,Drilled front dics,Custom front fender,1/4 fairing.
Please Log in or Create an account to join the conversation.
- creedmiller
- Offline
- User
- Posts: 19
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- DanOz7Five0
- Offline
- User
- Posts: 347
- Thank you received: 0
I thought WI was on the northern end of this "heat wave" but if your above normal and raining in January lets keep the global warming going!
Please Log in or Create an account to join the conversation.
- CRASH!
- Offline
- User
- Posts: 18
- Thank you received: 0
SHAME on you!!! LOL
(ok so I've got some Honda parts on mine too)
Looks like it's coming together nicely!
Ride'on,
~CRASH!~
Please Log in or Create an account to join the conversation.
- oldcoldankles
- Offline
- User
Peachland BC
1981 KZ1000 CSR M1
1983 KZ550 LTD M1 (Shaft)
1989 Corvette coupe
Please Log in or Create an account to join the conversation.
- Mark Wing
- Offline
- User
- Posts: 1697
- Thank you received: 22
Mark
Jesus loves you Everyone else thinks your an ***
77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.
Yorba Linda Cal.
Please Log in or Create an account to join the conversation.
- Alex_KZ1K
- Offline
- User
- Posts: 105
- Thank you received: 1
I'm surprised how little snow you have:)
Same here too... it's the middle of the winter and there is no snow at all where I live (about an hour west of Rob) now. I'm liking it... I need to get mine running on a nice day this week...
Please Log in or Create an account to join the conversation.
- mariozappa
- Offline
- User
- Posts: 901
- Thank you received: 8
What's the sticker of on you tailpiece?
Post edited by: mariozappa, at: 2006/01/30 09:46
1977 KZ650C1
and the KZ650/KZ750 Conversion
Please Log in or Create an account to join the conversation.
- Alex_KZ1K
- Offline
- User
- Posts: 105
- Thank you received: 1
Please Log in or Create an account to join the conversation.