side cover removal

More
22 Nov 2006 06:52 #94026 by gmbiowa
side cover removal was created by gmbiowa
Is there a special technique when removing the side covers on my 81 KZ750? I don't want to break the tabs. Also, are aftermarket air-filters ok? Can you recommend a place and brand. Thanks, Greg

Please Log in or Create an account to join the conversation.

More
22 Nov 2006 07:28 #94032 by Mcdroid
Replied by Mcdroid on topic side cover removal
Open up your seat, look down on each side at the tab/pegs to make sure they have not been wired in place or somehow attached in another way (some owners do that to prevent the covers from flying off). If the pegs are just pushed into the grommets, then just pull them out (straight out). There are occasions when the covers have become brittle with age/weather and the pegs will break....take your time :)

With respect to air filters, check out www.z1enterprises.com/ to see what Jeff offers for your bike.

Post edited by: Mcdroid, at: 2006/11/22 10:30

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
22 Nov 2006 07:40 #94034 by gmbiowa
Replied by gmbiowa on topic side cover removal
Michael, Thanks for the helpful info on the covers and filter. Greg

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum