- Posts: 5359
- Thank you received: 109
WHAT ARE THESE BRAKES OFF?
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
Post edited by: mark1122, at: 2006/06/17 10:58[img size=150]
Post edited by: mark1122, at: 2006/06/17 11:05
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Pterosaur
- Visitor
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
Post edited by: mark1122, at: 2006/06/17 11:13
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- Pterosaur
- Visitor
Or, perhaps the came from some vintage of Kaw Spectre - they had that gold factory trim...
Just a SWAG. (Scientific-Wild-A$$ed Guess....)
Post edited by: Pterosaur, at: 2006/06/17 11:15
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- RetroRiceRocketRider
- Offline
- User
- ...bring in the machine that goes PING!
- Posts: 1641
- Thank you received: 29
Kawi made the Spectre model in several sizes over the years, but what size and year Spectre you parts are from I couldn't tell you though, sorry. :dry:
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
im thinking the rotor is from a 76kz 900 they started using the 4 bolt rotors in 76 the forks are either 76 or 77 kz900 or thousand turned around with calipers on back side if im looking at picture right.the extra lug on the bottem of forks for fender brace is on oppisite side from caliper mount which narrows it down to a 76 or 77 78 was the year the calipers were moved to backside of forklegs above the fender brace mount.:whistle:thought id try the pic again im haveing trouble resizeing. the discks are probably LTD"s just drilled and i painted them and the rims. Can anyone tell me what these brakes and forks are off?the brakes dont look like they are kawasaki.my bike is a kz900a. did the forks have monting bolt holes on both sides in 1996, or are these off of a newer year?
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
Please Log in or Create an account to join the conversation.
- dan76kz900
- Offline
- User
- Posts: 103
- Thank you received: 0
But since then, I've studied many different front ends.
Your:
Rotor - looks interesting, it has a different drilling pattern than I have noticed. The holes are usually lined straight up and down, and not angled like you have. But they are 4 bolt rotors which goes on 76-80 kz900,kz1000 wheel hubs.
Calipers - those are funny looking ones.. as I haven’t seen one before :laugh:
Forks - I cant ID them.. but they do look similar to KZ forks.. one thing I noticed that I haven’t noticed before is the fender mounting ears. They are not the same as my forks.
So.. I'd look at pictures high and low until you figure out what parts you have. Try ebay, the gallery we have, etc..
Please Log in or Create an account to join the conversation.
- dan76kz900
- Offline
- User
- Posts: 103
- Thank you received: 0
Post edited by: dan76kz900, at: 2006/06/18 11:16
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
Please Log in or Create an account to join the conversation.
- mark1122
- Topic Author
- Offline
- User
- Keep twisting it
- Posts: 5359
- Thank you received: 109
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.