Coil question

More
03 Mar 2007 17:19 #117087 by loudhvx
Replied by loudhvx on topic Coil question
If it works, take a photo and let us know what coil that is. Always good to have options.

Hope it works, good luck!

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 17:31 #117094 by wrecktec
Replied by wrecktec on topic Coil question
The coils are GP Sorensen #GC124 from Autozone. The pic shows them temporarly taped to the frame. If it acutually works, I will fab up some sort of bracket probably in the area where they originally were.

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 17:42 #117098 by wrecktec
Replied by wrecktec on topic Coil question

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 17:46 #117099 by wrecktec
Replied by wrecktec on topic Coil question
Here is a pic
Attachments:

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 18:04 #117102 by arobsum
Replied by arobsum on topic Coil question
its a big coil! will it fit under the gas tank?

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 18:22 #117104 by wrecktec
Replied by wrecktec on topic Coil question
I think I can make it work but it's gonna be tight. The only thing is that with the tank on they will probably hang below it a little. If it won't work there, I will have to figure out somewhere else.

Post edited by: wrecktec, at: 2007/03/03 21:23

Please Log in or Create an account to join the conversation.

More
04 Mar 2007 05:50 #117211 by wiredgeorge
Replied by wiredgeorge on topic Coil question
Did you say the primary resistance was 6 ohms for these coils? Hmmm, wonder how hot a spark you can expect to get with the resistance that high...

wiredgeorge Motorcycle Carburetors
Mico TX
www.wgcarbs.com
Too many bikes to list!

Please Log in or Create an account to join the conversation.

More
10 Mar 2007 17:15 #119067 by wrecktec
Replied by wrecktec on topic Coil question
IT RUNS! I have owned this bike for 6 years and it has not ran since I have owned it. Now I just need to make a bracket to mount 'em to.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum