- Posts: 2
- Thank you received: 0
kz750 frame compatability
- Cloonster
- Topic Author
- Offline
- User
Less
More
11 Oct 2020 20:41 #836668
by Cloonster
kz750 frame compatability was created by Cloonster
So I got this kz750 1976 I believe but I got no title and just wondering if anyone would know what frames would be compatible, it's a twin kz750. Any help would be appreciated, this is my first Kawasaki.
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7584
- Thank you received: 2235
12 Oct 2020 06:29 - 12 Oct 2020 06:29 #836685
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic kz750 frame compatability
I am pretty sure the only compatible frames are going to be other 750 twins. Might be easier to just get a title for what you have. If you are in the U.S., it may be easy. In some states it is easy, in others not so much. If you live in a difficult state, getting a Vermont title first might be the ticket.
If you live outside the U.S., then I do not know. At any rate, it would pay to check with your local department to find out just what you need.
If you live outside the U.S., then I do not know. At any rate, it would pay to check with your local department to find out just what you need.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Last edit: 12 Oct 2020 06:29 by TexasKZ.
The following user(s) said Thank You: Cloonster
Please Log in or Create an account to join the conversation.
- martin_csr
- Offline
- User
Less
More
- Posts: 8019
- Thank you received: 1645
12 Oct 2020 06:34 #836686
by martin_csr
Replied by martin_csr on topic kz750 frame compatability
The best match would be the 76-79 750B models. For swapping the engine I'm pretty sure you can go with any KZ750-Twin frame, since the motor was pretty much unchanged thru the entire model run. The 83-84 750K models were belt drive & I have no idea if that would be an issue.
The following user(s) said Thank You: Cloonster
Please Log in or Create an account to join the conversation.