Bobber kz650

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Oct 2018 13:13 #792831 by SWest
Replied by SWest on topic Bobber kz650
Yes
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

  • TheeGreenRanger
  • Topic Author
  • Offline
  • User
More
25 Oct 2018 13:16 #792832 by TheeGreenRanger
Replied by TheeGreenRanger on topic Bobber kz650
Which are you say yes too? The carbs, the boots or both?
Thanks

Please Log in or Create an account to join the conversation.

More
25 Oct 2018 15:23 - 25 Oct 2018 15:29 #792840 by 650ed
Replied by 650ed on topic Bobber kz650

TheeGreenRanger wrote: So these would be a vm24?




Yes. That photo is of Mikuni VM24SS carbs. They appear to be the ones from a 1977 KZ650 in that they don't have the accelerator pump gadget on the bottom of carb #2, the accelerator pump related tubes between carbs, or the petcock vacuum orifice. They look like the ones on my 1977 KZ650-C1. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:
Last edit: 25 Oct 2018 15:29 by 650ed.
The following user(s) said Thank You: TheeGreenRanger

Please Log in or Create an account to join the conversation.

  • TheeGreenRanger
  • Topic Author
  • Offline
  • User
More
25 Oct 2018 16:01 #792842 by TheeGreenRanger
Replied by TheeGreenRanger on topic Bobber kz650
Do you know if my intake boots for the cv's are the same size?

Please Log in or Create an account to join the conversation.

More
25 Oct 2018 19:27 #792844 by 650ed
Replied by 650ed on topic Bobber kz650
Sorry, I don't know if they are. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Oct 2018 19:47 #792847 by SWest
Replied by SWest on topic Bobber kz650
No they are larger. The setup you posted will work with those carbs. Carbs with the pumps have 2.0 slides typically. I'd get the ones without it.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

  • TheeGreenRanger
  • Topic Author
  • Offline
  • User
More
04 Nov 2018 10:34 #793365 by TheeGreenRanger
Replied by TheeGreenRanger on topic Bobber kz650
Ok so I put on vm24 carbs rebuilt them and now the bike fires and runs but has a high idle still, when I adjust out the throttle air for the slides it dies. Any ideas? Bigger pilots needed or maybe pilot screw adjustments?

Please Log in or Create an account to join the conversation.

More
04 Nov 2018 11:59 #793367 by TexasKZ
Replied by TexasKZ on topic Bobber kz650
What effect does the idle adjustment screw have? You should not be trying to adjust the idle with the mixture screws.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

  • TheeGreenRanger
  • Topic Author
  • Offline
  • User
More
04 Nov 2018 12:02 #793368 by TheeGreenRanger
Replied by TheeGreenRanger on topic Bobber kz650
It just dies when adjusting that. Goes from high idle to dead

Please Log in or Create an account to join the conversation.

More
04 Nov 2018 18:43 #793378 by baldy110
Replied by baldy110 on topic Bobber kz650
Sounds like a vacuum leak. Did you cap the vacuum nipples on the carbs?

Please Log in or Create an account to join the conversation.

  • TheeGreenRanger
  • Topic Author
  • Offline
  • User
More
04 Nov 2018 18:49 #793379 by TheeGreenRanger
Replied by TheeGreenRanger on topic Bobber kz650
Yes I did.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
04 Nov 2018 19:30 #793381 by SWest
Replied by SWest on topic Bobber kz650
Could be where the carb holders bolt to the head. They may seem soft but there they can be hard with tiny cracks. I used :ohmy: Permatex to seal them until I could get some new ones.
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links