"1979 MKII Road Race Bike"

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
19 Apr 2009 00:00 #282995 by Captaingamez
"1979 MKII Road Race Bike" was created by Captaingamez
I have decided to turn my MKII into a total race bike on the road.

I got my front end put together yesterday. zx11 forks/wheel on 89' zx7 clamps.

I need to find a ZRX swingarm.

Any suggestions?
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr

Please Log in or Create an account to join the conversation.

More
19 Apr 2009 06:16 #283027 by parkingpuckguy
Replied by parkingpuckguy on topic "1979 MKII Road Race Bike"
There's a couple for sale on the ZRXOA forum. That's where I got mine.

Please Log in or Create an account to join the conversation.

  • Calhoun
  • Offline
  • User
  • Hayabusa= I ride to the strip club in flip flops
More
19 Apr 2009 06:29 #283028 by Calhoun
Replied by Calhoun on topic "1979 MKII Road Race Bike"
Hey nifty bike! I wish mine had looked like that. I am modifying an 80' MKII. It came with a 78' tank and body work.I just finished putting a ZRX swing arm on it.
80 IT175, 84 XL200, XT250, 95 ST1100 96 xr650l (30k miles),kz1000, KX250 97'
Last and most important 93 KX500.

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
19 Apr 2009 10:48 #283083 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
sweet, im gonna check ZRXOA for the swingarm. but where can i get the steering stem bearings to put this front end on?
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr

Please Log in or Create an account to join the conversation.

  • Calhoun
  • Offline
  • User
  • Hayabusa= I ride to the strip club in flip flops
More
19 Apr 2009 16:00 #283134 by Calhoun
Replied by Calhoun on topic "1979 MKII Road Race Bike"
So you want to use a zx7 triple clamp and stem, right?
If you know the inside diameter the the zx and the outside for the kz you may be able to do that.
A few of us have cut the zx stem off leaving the unseen part in the lower clamp. The kz stem is then machined, and pressed down inside the remaining piece of zx stem. Throw in a set of new KZ bearings and you are almost done.
1280
80 IT175, 84 XL200, XT250, 95 ST1100 96 xr650l (30k miles),kz1000, KX250 97'
Last and most important 93 KX500.
Attachments:

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
14 May 2009 11:05 #291160 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
Stripped down the KZ this weekend for frame strengthening, new engine gaskets from Z1E, and trying to mount up my new ZX11 front suspension.

are there any tapered roller bearings available for the kzs or am i stuck with loose balls (giggity giggity giggity)
640
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:

Please Log in or Create an account to join the conversation.

More
14 May 2009 11:34 #291167 by Jack
Replied by Jack on topic "1979 MKII Road Race Bike"
Tapered bearings are avialble for the KZ1000 MKll- I've got them in both of mine. Cutting the stem and welding to your existing lower tree is pretty easy -I put a set of KH400 2 stroke trees on my dragbike and had the KZ stem fitted and welded to the lower tree.
79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
28 Jun 2009 21:18 - 28 Jun 2009 21:31 #302913 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
just finished figuring out some of the dificulties of the rear end setup im planning on using. Its a GS1100 aluminum swingarm. with a ZX9 rear wheel and 160 tire. the setup has been centered in the swingarm. I had to Machine down the sprocket carrier in two places to make it run in the center, on the sprocket surface and on the very outside of the sprocket carrier bearing. but i seem to have plenty of chain room with this setup.
[img
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:
Last edit: 28 Jun 2009 21:31 by Captaingamez. Reason: pic

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
29 Jun 2009 10:49 - 29 Jun 2009 10:51 #303027 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
Had some problems adding my pics last night
984
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:
Last edit: 29 Jun 2009 10:51 by Captaingamez.

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
29 Jun 2009 10:53 #303030 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
quick preview of the frame before painting with the swingarm.
985
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
29 Jun 2009 10:55 #303032 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
You can see the lack of room on the outside of the sprocket carrier, but the adjusters do clear it now. and the tire rides center.
739
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:

Please Log in or Create an account to join the conversation.

  • Captaingamez
  • Topic Author
  • Offline
  • User
More
29 Jun 2009 11:03 #303033 by Captaingamez
Replied by Captaingamez on topic "1979 MKII Road Race Bike"
This is a pic of the brake setup im planning on using. It' s off of an R6.

Does anyone see any problem with cutting off the original mount bolt slot for the caliper mount (which stock, mounts direct to the swingfarm) and drilling a hole in it for a differant torque arm?
738
1979 Kz1000 MKII road racer project
1994 Seca II, pile in the corner
1973 Honda cb175 cafe racer
1971 Yamaha AT1
1975 Massey Fergusson MF440
1971 Skiroule 300rr
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links