- Posts: 25
- Thank you received: 0
kz200 Newbie
- beekay
- Topic Author
- Offline
- User
Less
More
08 Nov 2006 10:30 #90491
by beekay
kz200 Newbie was created by beekay
Hey everyone, new new newbie here.
last week I bought a 1977 kz200 15k miles and in need of some love. it was stored up by someone long ago until it was picked up by me with no keys or title. bonus was that since there were no keys, folks couldn't muck with it and it stayed in a dormant state with marvel mystery oil in the gas tank, and a very clean engine internals. all the rubber is shot, hoses, tubes etc. glass is broken on headlamp and little bits here and there.
I picked this bike by chance, I was looking for a project bike, but knew I did not have the skills to do a full blown restoration. after looking through many choices of bigger 750's, I realized that small and simple would improve my chances of a successful build.
It will be a super fun first project bike for me. i have mostly been a car guy, and into bicycles (mountain, road, etc) so this is a new fun project for me!
[img size=100]
Post edited by: beekay, at: 2006/11/08 14:01
last week I bought a 1977 kz200 15k miles and in need of some love. it was stored up by someone long ago until it was picked up by me with no keys or title. bonus was that since there were no keys, folks couldn't muck with it and it stayed in a dormant state with marvel mystery oil in the gas tank, and a very clean engine internals. all the rubber is shot, hoses, tubes etc. glass is broken on headlamp and little bits here and there.
I picked this bike by chance, I was looking for a project bike, but knew I did not have the skills to do a full blown restoration. after looking through many choices of bigger 750's, I realized that small and simple would improve my chances of a successful build.
It will be a super fun first project bike for me. i have mostly been a car guy, and into bicycles (mountain, road, etc) so this is a new fun project for me!
[img size=100]
Post edited by: beekay, at: 2006/11/08 14:01
Attachments:
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
Less
More
- Posts: 6641
- Thank you received: 323
08 Nov 2006 11:36 #90506
by Mcdroid
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Replied by Mcdroid on topic kz200 Newbie
Welcome beekay! I'm looking forward to watching you bring that KZ back to life. There is also a KZ200 forum starting up somewhere (there is a link to it buried (rather recently) on this site).
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- Shoe48
- Offline
- User
- Live each day as it is your last
Less
More
- Posts: 762
- Thank you received: 5
08 Nov 2006 11:39 #90507
by Shoe48
Replied by Shoe48 on topic kz200 Newbie
Welcome .. To the KZ Kraze
Please Log in or Create an account to join the conversation.
- pyxen
- Offline
- User
Less
More
- Posts: 488
- Thank you received: 7
08 Nov 2006 12:35 #90520
by pyxen
84 KZ550-F2 LTD
93 ZR550-B4
Replied by pyxen on topic kz200 Newbie
Welcome !
Pictures please - no matter how 'ugly' the bike is right now!
Pictures please - no matter how 'ugly' the bike is right now!
84 KZ550-F2 LTD
93 ZR550-B4
Please Log in or Create an account to join the conversation.
- beekay
- Topic Author
- Offline
- User
Less
More
- Posts: 25
- Thank you received: 0
24 Nov 2006 15:34 #94618
by beekay
Replied by beekay on topic kz200 Newbie
I thought I had one or 2 here already, must have been cleaned up for me...
I am trying to go along with most of the advise gathered from this site when doing a rebuild. it is hard, because I really want to tear it apart and get going with t.
This thing is missing many parts, but not too many. so it does not yet run. first rule is to get it running, and find out what is really wrong with it (before I break something putting it back together).
I took some of it apart, as part of replacing parts that were missing (like keys, coil, condensor, front brake). Replaced the rubber hoses, cleaned out the carb.
Waiting for a bunch of parts to show up from an ebay purchase. got new fork seals sitting here waiting for install this winter.
Plan: get it running, then tear down as much as Ifeel brave enough to do and put it back together again by spring.
Kind of Bike: I don't think this will be a full restoration or even close. I want to put some of my personal touches on the bike, whatever they might be. I do this with my cars, so keeping something totally stock is not part of my make-up. Yet, I do not plan to make a rat rod or a chopper out of this bike either. I am thinking of things with the blinkers, handlebars, lights, i don't know yet. when i get to my other pc,m I will drop some of the pics here.
the overall plan is to use this thread as the bike build blog.
Later!
Bill
I am trying to go along with most of the advise gathered from this site when doing a rebuild. it is hard, because I really want to tear it apart and get going with t.
This thing is missing many parts, but not too many. so it does not yet run. first rule is to get it running, and find out what is really wrong with it (before I break something putting it back together).
I took some of it apart, as part of replacing parts that were missing (like keys, coil, condensor, front brake). Replaced the rubber hoses, cleaned out the carb.
Waiting for a bunch of parts to show up from an ebay purchase. got new fork seals sitting here waiting for install this winter.
Plan: get it running, then tear down as much as Ifeel brave enough to do and put it back together again by spring.
Kind of Bike: I don't think this will be a full restoration or even close. I want to put some of my personal touches on the bike, whatever they might be. I do this with my cars, so keeping something totally stock is not part of my make-up. Yet, I do not plan to make a rat rod or a chopper out of this bike either. I am thinking of things with the blinkers, handlebars, lights, i don't know yet. when i get to my other pc,m I will drop some of the pics here.
the overall plan is to use this thread as the bike build blog.
Later!
Bill
Please Log in or Create an account to join the conversation.
- wireman
- Visitor
24 Nov 2006 15:45 #94625
by wireman
Replied by wireman on topic kz200 Newbie
welcome to z-jungle;)
Please Log in or Create an account to join the conversation.
- pumps
- Offline
- User
Less
More
- Posts: 617
- Thank you received: 3
24 Nov 2006 20:49 #94704
by pumps
Check out our site. kcvjmc.org
1977 Yamaha XS650
2000 Kaw W650
2 KZ440 LTDs , a 79 KZ400H and an 83 Belt Drive
Replied by pumps on topic kz200 Newbie
Welcome to the forums! a 200 will be lots of fun!
Check out our site. kcvjmc.org
1977 Yamaha XS650
2000 Kaw W650
2 KZ440 LTDs , a 79 KZ400H and an 83 Belt Drive
Please Log in or Create an account to join the conversation.
- beekay
- Topic Author
- Offline
- User
Less
More
- Posts: 25
- Thank you received: 0
30 Nov 2006 16:15 #96335
by beekay
Replied by beekay on topic 30 November 2006 update
So my first batch of goodies showed up from ebay and other various sites around the country. got a proper battery from bikebandits.
Since I had to tear out some things, I painted some brackets, the speedometer case, ignition switch, and a few other bits. I decided to go with flat black for these parts. i think it looks good.
Since I had to tear out some things, I painted some brackets, the speedometer case, ignition switch, and a few other bits. I decided to go with flat black for these parts. i think it looks good.
Please Log in or Create an account to join the conversation.
- beekay
- Topic Author
- Offline
- User
Less
More
- Posts: 25
- Thank you received: 0
30 Nov 2006 16:15 #96336
by beekay
Replied by beekay on topic 30 November 2006 update
So my first batch of goodies showed up from ebay and other various sites around the country. got a proper battery from bikebandits.
Since I had to tear out some things, I painted some brackets, the speedometer case, ignition switch, and a few other bits. I decided to go with flat black for these parts. i think it looks good.
Since I had to tear out some things, I painted some brackets, the speedometer case, ignition switch, and a few other bits. I decided to go with flat black for these parts. i think it looks good.
Please Log in or Create an account to join the conversation.
- fatkow
- Offline
- User
Less
More
- Posts: 102
- Thank you received: 2
30 Nov 2006 16:55 #96349
by fatkow
Replied by fatkow on topic 30 November 2006 update
it will be a fun ride.
Please Log in or Create an account to join the conversation.
- Sandy
- Offline
- User
- Fly High,Tony
Less
More
- Posts: 2452
- Thank you received: 13
30 Nov 2006 17:30 #96356
by Sandy
1977 KZ1000 A-1
Replied by Sandy on topic 30 November 2006 update
Way to GO,Beekay!
Another one resurected from the compost pile!:woohoo:
Another one resurected from the compost pile!:woohoo:
1977 KZ1000 A-1
Please Log in or Create an account to join the conversation.
- beekay
- Topic Author
- Offline
- User
Less
More
- Posts: 25
- Thank you received: 0
30 Nov 2006 20:14 #96385
by beekay
Replied by beekay on topic 30 November 2006 update
you know it;) appreciate the kind words all!
bk
bk
Please Log in or Create an account to join the conversation.