Welcome, Guest
Username: Password: Remember me

TOPIC:

Drag strip trip. 11 Mar 2012 10:16 #509014

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Time to take the Gpz motor to the drag strip as I haven't
had a chance since they've been closed for the winter.
If your in the centex area come on out and play a little.

The oldest continuously operating drag strip in Texas since about 1949 I think.
littleriverdragway.net/

April first is an all bike day (Sunday)at the track
but their running their normal Friday night deal plus
Saturday then the all bike Sunday so the brew crew's
gonna go Saturday morning and play a little then camp out/party at the track.
Ordering a new rear tire and chain and sprockets tomorrow
then should be good to go.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Last edit: by zukdave.

Drag strip trip. 11 Mar 2012 10:20 #509015

  • Old Man Rock
  • Old Man Rock's Avatar
  • Offline
  • User
  • Posts: 6224
  • Thank you received: 225
Yummy... B) Post your times/speeds after the days events.... :)
1976 KZ900-A4
MTC 1075cc.
Camshafts: Kawi GPZ-1100 .375 lift
Head: P&P via Larry Cavanaugh
ZX636 suspension
MIKUNI, RS-34'S...
Kerker 4-1, 1.5" comp baffle.
Dyna-S E.I.
Earls 10 row Oil Cooler
Acewell 2802 Series Speedo/Tach
Innovate LC1 Wideband 02 AFR meter

Phoenix, Az

Please Log in or Create an account to join the conversation.

Drag strip trip. 18 Mar 2012 10:27 #510394

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
OMR I'll be sure to do that along with pic's and video's

Using this calculator
www.skracing.com/horsepower.htm
and based on the factory 87 horsepower I should
get in the 12.30's range.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 19 Mar 2012 22:33 #510744

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
New tire, sprocket's and chain and a tach my old ass can see
light up at shift time.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 20 Mar 2012 22:05 #510924

  • LarryC
  • LarryC's Avatar
  • Offline
  • User
  • Posts: 1241
  • Thank you received: 309
That tach looks good on the bike. Have ball :lol:
Larry C.

Please Log in or Create an account to join the conversation.

Drag strip trip. 03 Apr 2012 01:33 #513723

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Texas party drag's put on by Texas scooter times rock.
I'm tired so story later.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 04 Apr 2012 23:08 #514101

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Ok so we get to the track about 4:00 o'clock Sat.
Get the bike unloaded and camp set up.


Still need to get pic.s from folk's made a pass.

13.61 @85.49 Thinkin it went 13.90 @96 with
the old motor something ain't right.
Next pass 13.67@85.26. so put it up for the night
Got a beer, fired the grill and watched the girls drink beer.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 04 Apr 2012 23:15 #514106

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Sunday morning rode around the pit's to warm it
up and stopped at buddy Beetle's camp.

After that was go make pass's.
Click the pic for video.

Ran these number's on a set of not to good VM-24's.
13.56@94.74
13.39@89.39
13.30@93.34
13.13@96.84
13.07@95.87 with a 1.71 60 ft.
Ran 1.84 1.85 60 ft all day.

My B-day party Sat. night at the drag strip
then Sunday morning makin pass's for breakfast.


PRICELESS...
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 05 Apr 2012 12:31 #514187

  • Injected
  • Injected's Avatar
  • Offline
  • User
  • Posts: 845
  • Thank you received: 367
Here is a KZ650 motor timing slip if you would like something to compare with...

Street bike with shocks and no wheelie bar, 831cc motor 10:1, 34mm flat slides, V&H pipe with baffle, rider with gear about 180lbs

Attachment earlytimingslip.jpg not found

Attachments:

Please Log in or Create an account to join the conversation.

Drag strip trip. 05 Apr 2012 21:59 #514267

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Thanks for the time slip.

My motor's a bone stock low milage (8400)
83 Gpz 750 with the little carb's and the pipe.
With carb's and more gear this thing will go a lot faster
it just run's out of breath with the little carb's
but that's all I got right now.

That motor is close to were I'm headed with this one.
Game plan is 810 cc wiseco kit, ported and milled head
thinking send it to Larry C.
Cam's of some grind just not sure on what.
Wired George's 30 mm bored vm 26's.
Sidewinder header.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Last edit: by zukdave.

Drag strip trip. 08 Apr 2012 23:10 #514777

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
My buddy Gerald that I got the gpz
doner bike from hooked me up with a
clean set of 29 smooth bore's.



Broke down and goin to the sonic cleaner at work.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 10 Apr 2012 00:27 #514942

  • Mark Wing
  • Mark Wing's Avatar
  • Offline
  • User
  • Posts: 1697
  • Thank you received: 22
My KZ650 with Yoshimura 716cc kit Yoshimura R&T cams 29 smoothbores head work by a VW guy and Yoshimura pipe and struts no bar ran 12.23 all the time and a best of 12.12. I'd usually do 6 or 8 passes between 12.21 and 12.26.

Mark
Jesus loves you Everyone else thinks your an ***

77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.

Yorba Linda Cal.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum