TOPIC:

I'm looking for the #4 carb body of the Z12 rack, also grab bar for a '79 1000 LTD. Thanks

Post a picture of the carb rack please. Are they 26mm or 28mm. The LTD grab bar is pretty rare

wrote:

Post a picture of the carb rack please. Are they 26mm or 28mm. The LTD grab bar is pretty rare

I'm also in need of an LTD grab bar, theres one on ebay for a crack head price of $350.....no thanks 

I do not want to mislead anyone on this but at pretty sure the carb set ID Z12 00 is a set of vm26ss carbs.  I think they were used on the kz900 bikes.

wrote:

I do not want to mislead anyone on this but at pretty sure the carb set ID Z12 00 is a set of vm26ss carbs.  I think they were used on the kz900 bikes.

If the OP will reply, I’m willing to pay it forward. Wheelhop, sent me several parts to Frankenstein a set of carbs together. He said to hang on to the extras. If I have what he needs I’ll help him out, because of Wheelhops generosity. 

Sorry for the late reply. Turns out I don't need the carb after all, the slide was stuck in the carb body, the previous owner tried prying it out with a screw driver flairing the bottom of the slide a little. After I sanded the flair off it works good.

Does anyone know if the grab bar from the non LTD models will fit, I know it won't be as tall but am curious if the mounting points are the same ?

I saw that ad too, I had a similar thought.

Yes. An “A” model seat stay will bolt on without modifications. 

wrote:

Yes. An “A” model seat stay will bolt on without modifications. 

Ok thanks, I may have to go that route if I can't find one for a LTD.