Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

rotor tool (alternator act) kawa part no 57001-308 18 Apr 2015 19:57 #668609

  • Randombeat
  • Randombeat's Avatar Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23
FSM says I need this tool to hold the alternator rotor while I turn the secondary shaft but loose... I already order the flywheel puller bolt, but do I need the rotor tool also? I can't find one anywhere... *bangs head*


Attachment 1429411689809905573440.jpg not found

1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style
Attachments:

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 00:27 #668633

  • gd4now
  • gd4now's Avatar
  • Offline
  • User
  • Denco where did you go?
  • Posts: 1245
  • Thank you received: 361
You do need to hold it from spinning some how. You might be able to do so with a strap wrench.
1977 KZ650 B1
Pods and Denco header


This is my Z

OLD KAW OWNERS SMILE ALOT
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 06:44 #668648

  • CoreyClough
  • CoreyClough's Avatar
  • Offline
  • User
  • GPz550 Addiction
  • Posts: 1094
  • Thank you received: 80
No eBay APP ID and/or Cert ID defined in Kunena configurationI saw one of these tools on Ebay a few years back, and scooped it up. I have not seen one since. Seriously, someone needs to remake something like this, it doesn't look that difficult. If you find one, buy it! I have only seen something like this, but have no experience using it.
'85 GPz550(ZX550-A2)

GPz550 Base Manual --> tinyurl.com/ze5b3qo
GPz550 Supplement Manual --> tinyurl.com/h34d2o6
GPz550.com --> www.nwsca.com/scripts/gpz_forum_2005/default.asp
First Race Win GPz550 --> tinyurl.com/o5y3ftp
The following user(s) said Thank You: !Seymore, Randombeat

Please Log in or Create an account to join the conversation.

Last edit: by CoreyClough. Reason: spelling

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 08:24 #668663

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • Posts: 15344
  • Thank you received: 2828
.
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

Last edit: by 650ed.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 08:32 #668667

  • Randombeat
  • Randombeat's Avatar Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 09:54 #668680

  • Tyrell Corp
  • Tyrell Corp's Avatar
  • Offline
  • User
  • "You were made as well as we could make you"
  • Posts: 1650
  • Thank you received: 260
I used a Honda CB750 rear wheel spindle to force the rotor off, not sure of the thread but it came off easy enough. Locking the back wheel in gear will hold the rotor. Obvious, but never use a hammer on this!

I used some fine grinding paste to lap the crank nose taper/rotor, a good finishing touch.
1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 10:17 #668685

  • Randombeat
  • Randombeat's Avatar Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23

Tyrell Corp wrote: I used a Honda CB750 rear wheel spindle to force the rotor off, not sure of the thread but it came off easy enough. Locking the back wheel in gear will hold the rotor. Obvious, but never use a hammer on this!

I used some fine grinding paste to lap the crank nose taper/rotor, a good finishing touch.


Thanks for the info! I'm doing the starter clutch, bike is an 1980 kz750h1 ltd. I don't think I need to actually pull the rotor, I just need to prevent it from turning while I try to loosen the secondary shaft nut...
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 10:47 #668687

  • DoctoRot
  • DoctoRot's Avatar
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
  • Posts: 2543
  • Thank you received: 664
put it in 5th gear and have someone step on the rear brake. Or you can pull the clutch cover and hold the clutch basket with a clutch wrench. EBC makes those.
Attachments:

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 13:19 #668716

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • Posts: 15344
  • Thank you received: 2828

Randombeat wrote:

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..


Take a look at the 2 links below. I believe they each contain information that should be helpful to you as you tackle the starter clutch. Ed

forums.kz650.info/index.php?action=dlatt...pic=586.0;attach=873

forums.kz650.info/index.php?topic=5152.0
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 15:14 #668736

  • Randombeat
  • Randombeat's Avatar Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23

650ed wrote:

Randombeat wrote:

650ed wrote: .


Im glad you saw this, I was just about to link you to it in my other thread..


Take a look at the 2 links below. I believe they each contain information that should be helpful to you as you tackle the starter clutch. Ed

forums.kz650.info/index.php?action=dlatt...pic=586.0;attach=873



forums.kz650.info/index.php?topic=5152.0


Thanks ed. The first link, I get the download, but it says can't open file.. Maybe its the tablet I'm on? Could you email it to This email address is being protected from spambots. You need JavaScript enabled to view it. ?

Thanks again
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 15:32 #668746

  • 650ed
  • 650ed's Avatar
  • Offline
  • User
  • Posts: 15344
  • Thank you received: 2828
I sent it. It's a PDF file. Ed
1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: Randombeat

Please Log in or Create an account to join the conversation.

rotor tool (alternator act) kawa part no 57001-308 19 Apr 2015 15:53 #668750

  • Randombeat
  • Randombeat's Avatar Topic Author
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23

650ed wrote: I sent it. It's a PDF file. Ed


Can't thank you enough ed, this PDF is what I originally read, and makes no mention of any special tools. Just walls and broom handles lol.
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Powered by Kunena Forum