- Posts: 993
- Thank you received: 523
KZ650 Touring Build
- Injected
-
Topic Author
- Offline
- User
Less
More
17 Jun 2024 07:19 #900859
by Injected
Replied by Injected on topic KZ650 Touring Build
The following user(s) said Thank You: JR, howardhb, Wookie58, Kelly E
Please Log in or Create an account to join the conversation.
- Injected
-
Topic Author
- Offline
- User
Less
More
- Posts: 993
- Thank you received: 523
19 Jun 2024 05:56 - 19 Jun 2024 05:57 #900961
by Injected
Replied by Injected on topic KZ650 Touring Build
I seem to have a tiny oil weep on the stator side of the base gasket, and another at the rear center where the cam chain adjuster is. We are talking droplets.
I did torque the outer head nuts before I left the show, but it showed up again on the ride back. I will need to back the nuts off and retorque them again before the next ride.
The new oil cooler did not leak one drop there or back.
I did not baby the engine both ways, it saw 8K RPM a few times, but backed off once I hit 100 MPH.
I did torque the outer head nuts before I left the show, but it showed up again on the ride back. I will need to back the nuts off and retorque them again before the next ride.
The new oil cooler did not leak one drop there or back.
I did not baby the engine both ways, it saw 8K RPM a few times, but backed off once I hit 100 MPH.
Last edit: 19 Jun 2024 05:57 by Injected. Reason: sp
The following user(s) said Thank You: Wookie58
Please Log in or Create an account to join the conversation.