Welcome, Guest
Username: Password: Remember me

TOPIC:

'75 KZ400 29 Jan 2021 20:37 #842672

  • Exdraghunt
  • Exdraghunt's Avatar Topic Author
  • Offline
  • User
  • Posts: 25
  • Thank you received: 0
Here's a fun item I found while on vacation that's been a big help with this.

Myself and a friend went into a small, antique car garage. The kind of place that's piled floor to ceiling with NOS parts dating back over a hundred years. Plus books, memorabilia, magazines, salesman samples, and pretty much anything you can think of.

Well, I found the (quite small) motorcycle section and found an original KZ400 shop manual from 1975! Admittedly I do have a download of the manual, but I prefer paging through a physical book so much more.



A bit beat-up looking, but still has all it's pages! Even has the color wiring diagram, which will really come in handy when I have to go through all the electrical on the bike.
' 75 KZ400-D
Attachments:

Please Log in or Create an account to join the conversation.

'75 KZ400 30 Jan 2021 00:08 #842675

  • Kaylinator
  • Kaylinator's Avatar
  • Offline
  • Sustaining Member
  • Posts: 342
  • Thank you received: 74
Nice find!
1978 KZ1000-A2
kzrider.com/forum/11-projects/613296-1978-kz1000-a2-barn-find

1978 KZ400-B1

2022 Z900RS SE

Please Log in or Create an account to join the conversation.

'75 KZ400 06 Apr 2021 08:57 #846273

  • Exdraghunt
  • Exdraghunt's Avatar Topic Author
  • Offline
  • User
  • Posts: 25
  • Thank you received: 0
Lapping the valves went well and, after much swearing, I managed to get the valves back in. 

 

Behold my kludged valve-spring press. Well, it worked, at least. Today, I'm going to see if I can't get the engine back together. 
' 75 KZ400-D
Attachments:

Please Log in or Create an account to join the conversation.

'75 KZ400 07 Apr 2021 11:14 #846340

  • Exdraghunt
  • Exdraghunt's Avatar Topic Author
  • Offline
  • User
  • Posts: 25
  • Thank you received: 0
Well, the engine has to come apart further before it can go back together. When we were taking the cylinder head off, we accidently broke the seal on the cylinder base gasket, so that's gotta be replaced. 

 

Happily, the cylinders look to be in quite good shape. The pistons are also nice, with only a thin layer of black carbon on top that easily scraped off. 

The main problem will be trying to remove whatever baked on green stuff is all over the gasket surface of the crankcase. I don't know what it is, but it's stubborn. 
' 75 KZ400-D
Attachments:

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum