1981 standard to eddie

More
24 Jan 2008 13:16 #190856 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
I will get some more pictures up as soon as I get it running. I already took the fairing and stuff off so that I can figure out whats going on(coils wired up wrong so far) and as soon as im done I will clean it up a little and put it back together.

Please Log in or Create an account to join the conversation.

More
24 Jan 2008 17:12 #190891 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
Heres a picture not cleaned yet though.
475


Post edited by: kboom36, at: 2008/01/24 20:26

Post edited by: kboom36, at: 2008/01/24 21:35
Attachments:

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 12:40 #191015 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
Got it running this afternoon and it sounds nice especially with the full yoshimura header. Nice tight engine no noises.

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 12:56 #191016 by Mcdroid
Replied by Mcdroid on topic 1981 standard to eddie
Jeez...and a yosh pipe too!!!!!!!!!!!!!!!!! You struck the proverbial motherlode:woohoo: :woohoo:
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 13:15 #191020 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
Now, for some elbow grease.

Post edited by: kboom36, at: 2008/01/25 21:02

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 13:34 #191022 by Bluemeanie
Replied by Bluemeanie on topic 1981 standard to eddie
Good score dude! Now get rid of that BIG fairing and get the small quarter for around the headlight and you'll have a beauty!:)
1980 KZ650F1, Bought new out the door for $2,162.98!

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 17:59 #191054 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
Where do you think I can find a quarter fairing ?. I looked on ebay and there is nothing on there, at least not today. If I decide to keep the factory paint scheme but using a quarter fairing is it possible to get the factory decals through kawi or anywhere else?. I see that member "The Gringo" has a 750 that has matching quarter fairing decals with the tank.

Post edited by: kboom36, at: 2008/01/25 20:59

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 18:57 #191059 by hannah1
Replied by hannah1 on topic 1981 standard to eddie
Keep checking ebay , you'll need an OEM fairing from a '82 GPz750 , '82 GPz1100 or an '82-83 ELR . 550 fairings are more common , but are smaller . Try to get one with brackets included . Reproduction Graphics should have sets for your bike and can probably make fairing stripes . You could most likely cut up a set from a tank to fit the fairing , if that's all they have available .

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 19:06 #191061 by Bluemeanie
Replied by Bluemeanie on topic 1981 standard to eddie
Kinda like this?

[url=http://cgi.ebay.com/ebaymotors/1982-KAWASAKI-GPZ750-GPZ-750-LIGHT-PLASTIC-WINDSHIELD_W0QQitemZ350016084536QQihZ022QQcategoryZ34284QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
]82 GPZ750 Fairing[/url]

Post edited by: Bluemeanie, at: 2008/01/25 22:07
1980 KZ650F1, Bought new out the door for $2,162.98!

Please Log in or Create an account to join the conversation.

More
25 Jan 2008 20:39 #191074 by jcote75
Replied by jcote75 on topic 1981 standard to eddie
Hi,

I got a gpz1100 quater fairing for sale with screen and all bracket. GOt the bucket and light also if you want.

I'm in Quebec, Canada.

Send me a PM and I'll send you some picture this week end.

Joce

Please Log in or Create an account to join the conversation.

More
26 Jan 2008 09:47 #191112 by kboom36
Replied by kboom36 on topic 1981 standard to eddie
Here it is without the fairing, up and running. I hope giving a link is ok I never seen nothing in the rules to say different, just copy and paste..... www.youtube.com/user/kboom36

Please Log in or Create an account to join the conversation.

More
26 Jan 2008 09:55 #191113 by Mcdroid
Replied by Mcdroid on topic 1981 standard to eddie
Interesting...didn't realize that the J3 had a GPz style instrument pod...:)
Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links