ZX600A Engine in KZ650 frame. Been done?

More
29 Dec 2005 16:48 #15106 by jarhead
Replied by jarhead on topic ZX600A Engine in KZ650 frame. Been done?
I think a H2 motor would go nicely into the ZX frame. There are a few who have done that.

Please Log in or Create an account to join the conversation.

More
29 Dec 2005 18:16 #15118 by ten6
Replied by ten6 on topic ZX600A Engine in KZ650 frame. Been done?
twowheeledterror wrote:

ten6 wrote:

well, you have eliminated so much surface area since it is liquid cooled I would think a larger displacement zx powerplant would fit nicely...:evil:


As soon as you put a larger displacement ZX powerplant in my garage I will use it! :D hehehe:woohoo:


Hmmmm....good point. I say go for it!!!On the plus side, that smaller engine in a larger frame will actually clean up the lines of the bike(except for the radiator but I assume you already have a plan for that)It will look sleeker and that is cool.The other plus side is that any engine repair requiring removal of the pan should be super easy as opposed to a KZ650. Keep us posted on this one...B)

Michigan City, Indiana
Firefighter MCFD IAFF Local #475
(3) KZ650s (1) 1996 Vulcan 1500A (1) 1978 KZ1000 (1) 1986 Yamaha Radian 600
2000 Dodge Ram 4x4
1960 Chevy Bel-Air

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Topic Author
  • Visitor
29 Dec 2005 23:53 #15161 by twowheeledterror
Replied by twowheeledterror on topic ZX600A Engine in KZ650 frame. Been done?

ten6 wrote:

Hmmmm....good point. I say go for it!!!On the plus side, that smaller engine in a larger frame will actually clean up the lines of the bike(except for the radiator but I assume you already have a plan for that)It will look sleeker and that is cool.The other plus side is that any engine repair requiring removal of the pan should be super easy as opposed to a KZ650. Keep us posted on this one...B)


This thing would look like it's hanging in there. Thats how much room there is.

There's still just one problem... JUSTIN WILL KILL ME! HAHAHA

Please Log in or Create an account to join the conversation.

  • guitargeek
  • Offline
  • User
  • Elitist, arrogant, intolerant, self absorbed.
More
30 Dec 2005 00:48 #15165 by guitargeek
Replied by guitargeek on topic ZX600A Engine in KZ650 frame. Been done?
Okay, as per our private conversation: I absolve you. If it makes more power and weighs less, and you can make it work, then go for it! Put the 650 motor in the 400 frame, then put the 400 motor on a go kart, then find an H2 motor for the ZX frame. Too bad you don't still have that ZX1000 motor sitting around, you could try that instead...

1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Topic Author
  • Visitor
30 Dec 2005 01:38 #15166 by twowheeledterror
Replied by twowheeledterror on topic ZX600A Engine in KZ650 frame. Been done?
guitargeek wrote:

Okay, as per our private conversation: I absolve you. If it makes more power and weighs less, and you can make it work, then go for it! Put the 650 motor in the 400 frame, then put the 400 motor on a go kart, then find an H2 motor for the ZX frame. Too bad you don't still have that ZX1000 motor sitting around, you could try that instead...

I can see it now.

"And in tonights news, a young man is injured while attempting to outrun police on what seems to be some kind of hopped up go-kart."

lol

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum