can you find me one of these?????

PLUMMEN wrote:

so what makes you think its bad?

well i took a light tester and i have power going in, but nothing comming out.

muddy1 wrote:

this looks like the numbers match


cgi.ebay.com/ebaymotors/89-Yamaha-FZR600...fPartsQ5fAccessories


enjoy

yeah, thanks. i seen that one. fkin 160 bucks...im ganna have my roomate run by the cycle salvage and see if he can swipe one up.

I have seen more than one ECM get killed by someone with a test light who didn't know what they were doing.

oh dorothy

testarossa wrote:

I have seen more than one ECM get killed by someone with a test light who didn't know what they were doing.

i dont understand.

kz1k wrote:

muddy1 wrote:

this looks like the numbers match


cgi.ebay.com/ebaymotors/89-Yamaha-FZR600...fPartsQ5fAccessories


enjoy

yeah, thanks. i seen that one. fkin 160 bucks...im ganna have my roomate run by the cycle salvage and see if he can swipe one up.

swipe one huh?just gets better and better all the time

That part is an igniter and if u can find one for the YAMAHA YX600S Radian or the FJ series 600 bikes,they are all the same.there are lots of Radian parts on Ebay right now so knock yourself out and have fun.Shame on u Dr.P.bj

ok, one thing at a time. i went to wally world and baught a volts/ohm meter. when checking just my ignitor, (disconnected from the bike) what terminals do i check, and what #'s should i get?

if you are looking at the ignitor, the left, larger plug has 4 sets of terminals. if i set my meter to 200k on ohms and touch the second set of terminals, (top and bottom), it reads 6.6. on the smaller plug the first set of terminals, ( from left to right), it reads 1.2.

all the other terminals read nothing on both plugs exept for the 2 sets i described above. now remember this is when the ignitor is removed from the bike. let me know if these #'s check out....thanks.

If I read the postings correctly, this ignitor is from a Yamaha. Please don't take offense, but you may consider trying your questions on a Yamaha web site as there might be folks there that are more familiar with the specific ignitor you have. Ed

fine, ill take it elseware..sorry, just thought.....nevermind.