Welcome, Guest
Username: Password: Remember me

TOPIC:

Drag strip trip. 02 Dec 2016 17:50 #749323

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Corey yes the carbon was about the same on all four piston's so yes it could be the additive
as I do street ride it some on 93 octane E10 pump gas.
At the track I've been running 100 octane Sunoco fuel but this last time out the lowest they had was 110 octane
which is way to high for my 10 3/4 comp motor so I got a gallon and cut it with a 1/2 gal. of 87 octane E10 pump gas.

At work we're a VP fuel dealer for their small engine fuel's we have their 93 octane NON ethanol fuel
in 55 gal. barrel'sI did run a few gal. of that on the street one time just to see and it seemed to run better
then the pump shit.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 Dec 2016 17:36 #749856

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Damn I love riding this thing :)
Night before last got out for a little ride around the hood it was a little cold temps high 40's
bike ran great but it did take a damn good burnout to get the tire to hook on the cold street.

Not saying I was out on a cold ass night doing things that needed the bike to hook on a cold street
but there is a sportbike boy with an R6 of some year thats now butt hurt. :evil:
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
The following user(s) said Thank You: bluej58

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 Dec 2016 18:55 #749864

  • SWest
  • SWest's Avatar
  • Offline
  • Sustaining Member
  • 10 22 2014
  • Posts: 22408
  • Thank you received: 2610
:woohoo: Good for you.
Steve

Please Log in or Create an account to join the conversation.

Drag strip trip. 09 Dec 2016 19:36 #749870

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
I needed beer money B) B) B)
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 29 Dec 2016 20:23 #750931

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Got the bike out night before last and met up with my buddy Dan on his 99 ZRX1100 and burned up 3/4 tank of gas.
Started in north Austin jumped on I-35 blasted to south Austin about 25 miles at 70 mph
for a bike night deal then took surface streets back north through downtown.
On the way back playing on a side street we did a 20 mph first gear hit I pulled him to the
top of my 4th gear he started to come around me as we passed the two cop's in the parking lot.
.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 31 Dec 2016 07:30 #751002

  • bluej58
  • bluej58's Avatar
  • Offline
  • Sustaining Member
  • The chrome don't get you home
  • Posts: 2484
  • Thank you received: 511
Did they ask for your autograph?
78 KZ1000 A2A

Please Log in or Create an account to join the conversation.

Drag strip trip. 31 Dec 2016 08:56 #751005

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
They set there in the parking lot and didn't come after us had they I would have stopped
ain't worth trying to run.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Drag strip trip. 03 Jan 2017 18:42 #751330

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Patting my own back for a minute I've built one bad ass 100% street legal KZ650 ;)

Think about it in the last month I've been to the track twice and on a spin the tire launch it went 7.18 1/8 mile.
Took it back to the shop put the tag back on, put the baffle back in, turned a knob on the Dyna 2000 ign. box
took 5 degrees total timing out and put 93 octane pump gas in it and went blasting down the freeway
and have put about 150 street mile's on it since .
I could go right now and flip the switch and go burn a tank of gas on the street or put it on the trailer and go to the track.

Ya I think I did ok B) B) B)
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Last edit: by zukdave.

Drag strip trip. 04 Jan 2017 07:30 #751357

  • rstnick
  • rstnick's Avatar
  • Offline
  • User
  • Posts: 4365
  • Thank you received: 373
You have done well Dave!
B)

Sitting here watching your video as the snow is falling outside.

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R
2005 z750s

Please Log in or Create an account to join the conversation.

Last edit: by rstnick.

Drag strip trip. 04 Jan 2017 07:36 #751359

  • SWest
  • SWest's Avatar
  • Offline
  • Sustaining Member
  • 10 22 2014
  • Posts: 22408
  • Thank you received: 2610
Maybe I should have done that before I changed my tire. :woohoo: Good way to go out in my book. B)
Steve

Please Log in or Create an account to join the conversation.

Drag strip trip. 04 Jan 2017 13:17 #751389

  • Street Fighter LTD
  • Street Fighter LTD's Avatar
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
  • Posts: 4818
  • Thank you received: 1967

rstnick wrote: You have done well Dave!
B)

Sitting here watching your video as the snow is falling outside.


I share your pain



Dave
Im just jealous that you can ride this time of year
Dave

Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Attachments:

Please Log in or Create an account to join the conversation.

Drag strip trip. 04 Jan 2017 15:44 #751399

  • zukdave
  • zukdave's Avatar Topic Author
  • Offline
  • User
  • Posts: 1685
  • Thank you received: 229
Dave no riding today it only got to about 48*f after being 70 yesterday.
forecast is for 67*f tomorow then 38*f Friday just a normal Texas flip flop winter.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Last edit: by zukdave.
Powered by Kunena Forum