TOPIC:

I AM LOOKING FOR A SOURCE TO BUY SOME PAN HEAD SCREWS AND ACORN NUTS FOR THE 1977 KZ1000 A 1.
Does anyone know the threads per inch and pitch used on the kz1000?

All threads on the Kawasaki's are Metric so measurements are in MM or fractions of.
Most common used on the chassis are -
M5 x 0.8
M6 x 1
M8 x 1.25 
M10 x 1.25
M10 x 1 
M12 x 1.25.
If you state the actual area on the bike the fasteners are for then a more specific answer can be given.
 

THANK YOU
THESE ARE THE PAN HEAD SCREWS 4mm x 12mm used on the airbox 
THERE ARE EIGHT OF THEM AND THEY HOLD THE TWO METAL SCREENS TOGETHER WITH THE AIR DUCT HOLDING PLATE

You can buy genuine Kawasaki screws and nuts from Partzilla, or your local Kawasaki dealer.

www.partzilla.com/catalog/kawasaki/motor...aner-77-78-a1-a2-a2a

Ace Hardware stores carry a wide variety of hardware and likely have some that will fit just fine.