- Posts: 7507
- Thank you received: 2823
Cross threaded tip of cylinder Kawasaki KZ400 1974
- Nessism
- Away
- Sustaining Member
Less
More
10 Nov 2016 13:42 #747716
by Nessism
Good choice!
Replied by Nessism on topic Cross threaded tip of cylinder Kawasaki KZ400 1974
kyan44 wrote: www.amazon.com/Powerbuilt-640811-Back-Ta...Repair/dp/B0014FGVVW
I used this tool. And it was magical! Fixed my problem. Thanks guys!
Good choice!
Please Log in or Create an account to join the conversation.
- KZB2 650
- Offline
- User
Less
More
- Posts: 1475
- Thank you received: 265
10 Nov 2016 15:09 #747727
by KZB2 650
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Replied by KZB2 650 on topic Cross threaded tip of cylinder Kawasaki KZ400 1974
Good to hear and will remember that tool if I ever run into a problem ...... my threads are in exc shape but just today taking them out and back in (after a valve clearance check) it had me thinking about it and am always overly careful. Some of us use a small amount of anti seize to keep em free ... (although a few don't) .... personally I wouldn't put one in with out it.
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.
Please Log in or Create an account to join the conversation.