Kano's Projects Z1000R and KZ1000J's

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

17 Apr 2009 14:38 - 25 May 2009 13:56
#282628
well after a long chat with fellow limey jeff at z1 im selling the dyna 4000 stuff and gonna order a dyna 2000.

he said and i quote lol "Are you going to put this setup on a drag bike? It's not a setup you would typically run on the street."

it was at this point i started to question my purchase lol,
mainly because i know he ran a turbo kz on the road and that's ok :ohmy: but a dyna 4000 on the road big nono. :blush:

he also said "It's not a great system for the street. The Dyna 2000 is the street system.

The 4000 is a pure race ignition - it creates a very powerful spark, but the ignition lacks the ability of an advance curve. The low-end performance is rough due to the lack of advance.

On the box should be the version - DP-4000-1 is the most likely version.
The DP-4000-2 and 2S are for dual plug setups. The DP400-1S is a more advanced version of the 4000 - for some serious sparks..."

last quote i promise " it will run but your be disappointed"

1hr later items were listed on eBay lol.

learn from my mistake don't drink and snipe on eBay lol :blink:

Attachments:

Last edit: 25 May 2009 13:56 by kano.

Please Log in or Create an account to join the conversation.

  • mark1122
  • mark1122's Avatar
  • Offline
  • User
  • Keep twisting it
  • Posts: 5359
  • Thanks: 109

Re: Kano's Projects KZ1000R and KZ1000J

17 Apr 2009 14:55 - 28 Nov 2009 19:36
#282631
You wont be disapointed. I think it is the best way to go. no more mechanical advance,built in rev limiter,built in timming light,you can run the grey 2.2 ohm coils for more zap, and no more points.B)
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 28 Nov 2009 19:36 by KZQ.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:28 - 26 Apr 2009 19:22
#285443
fixed the camera.
mounted the zrx brake disk and caliper,
installed the dyna 2000,

Attachments:

Last edit: 26 Apr 2009 19:22 by kano.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:29 - 26 Apr 2009 15:29
#285444

Attachments:

Last edit: 26 Apr 2009 15:29 by kano.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:29 - 26 Apr 2009 15:30
#285445

Attachments:

Last edit: 26 Apr 2009 15:30 by kano.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:30 - 26 Apr 2009 15:30
#285447

Attachments:

Last edit: 26 Apr 2009 15:30 by kano.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:31 - 26 Apr 2009 15:31
#285448

Attachments:

Last edit: 26 Apr 2009 15:31 by kano.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 15:32 - 26 Apr 2009 15:32
#285449
:laugh:

Attachments:

Last edit: 26 Apr 2009 15:32 by kano.

Please Log in or Create an account to join the conversation.

  • timebomb33
  • timebomb33's Avatar
  • Offline
  • User
  • Posts: 4288
  • Thanks: 10

Re: Kano's Projects KZ1000R and KZ1000J

26 Apr 2009 18:51 - 28 Nov 2009 19:38
#285498
kano is that dyna 4000 the older pro version or the super pro version. because i'm kind of in the market for a spare ignition. for my big bike. is it complete as well plate coils and box.
1973 z1 2-1974z1-a,2-1975z1-b dragbikes1015cc+1393cc, 1977kz1000,1978kz1000,1981kz1000j, 1997 zx-11, 2000 z12r,1428turbo nitrous pro-mod and a shit load of parts thats all for now leader sask.,CANADA
I THINK MY POWERBAND BROKE
Last edit: 28 Nov 2009 19:38 by KZQ.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

26 Apr 2009 18:54
#285499
the dyna 4000 sold last weekend sorry dude,

Please Log in or Create an account to join the conversation.

  • Bad Kaw
  • Bad Kaw's Avatar
  • Offline
  • User
  • Flying Squirell
  • Posts: 1750
  • Thanks: 13

Re: Kano's Projects KZ1000R and KZ1000J

26 Apr 2009 21:18 - 28 Nov 2009 19:39
#285596
Ya know, that is just a good lookin' bike!
-KR
78 Kawasaki Z1R
81 Kawasaki KZ1000J (mods)
82 Kawasaki ELR Clone (1000 J)
82 Kawasaki KZ750R1/GPz750 ELR-ed
70 Kawasaki KV75
83 Honda CB1100F (few mods)
79 Suzuki GS1000 (rolling frame / project / junk)
84 Suzuki GS1150ES (modified project)
83 Yamaha XJ900R (project / junk)
Last edit: 28 Nov 2009 19:39 by KZQ.

Please Log in or Create an account to join the conversation.

  • kano
  • kano's Avatar Topic Author
  • Offline
  • User
  • Not Another Bloody Limey!
  • Posts: 1144
  • Thanks: 11

Re: kz1000R2 Eddie Lawson Replica (83)

06 May 2009 19:18 - 08 May 2009 17:57
#288628
what do you think carbon, painted or half and half for the front fender,
just arrived!

Attachments:

Last edit: 08 May 2009 17:57 by kano.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum