KZR's Bikes of the Month for 2024

Cleaning aluminum tips needed...

More
01 Aug 2014 07:52 #642290 by TimKz44082
Cleaning aluminum tips needed... was created by TimKz44082
Yesterday I went to the local ac supply house and asked for something to clean aluminum. He gave me something called nubrite, I was looking for aluma brite and was told this will do the same thing. So I tested it on the exhaust pipe clamps and either they are not aluminum (maybe pig iron) because all it did was turn them a dark grey, with a lot of oxidized metal on them. I still had to hand polish, the cleaner just took off the white oxidation and left the dark grey oxidation. Does anyone know of something I can spray on the head and cases to remove the oxidation and make them shiny again?

1981 KZ440 LTD
1982 KZ440 LTD
1974 Honda Trail 90
1982 Honda Express NC50
1982 Honda Trail 110
Electric scooter

Please Log in or Create an account to join the conversation.

  • Grumpy Ole Artist
  • Offline
  • User
  • Eschew Obfuscation!
More
01 Aug 2014 08:36 #642294 by Grumpy Ole Artist
Replied by Grumpy Ole Artist on topic Cleaning aluminum tips needed...
Certainly not an expert, but, to my knowlege, "hands on" is the only way to do it...For the covers...1400 wet/dry paper, 2000 wet/dry, rubbing compound, Mothers Aluminium Polish, buff, VOILA! mirror finish! For cases, &c, Simple Green degreaser with polyester "wire" wheels (Ace hardware) on a drill

1978 KZ650 B2
Former rides...1976 CB360T, 1985 Shadow 700, 1985 GPZ750Turbo

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 08:59 #642303 by TimKz44082
Replied by TimKz44082 on topic Cleaning aluminum tips needed...
I'm hoping to find an easy way to clean the fins of the motor. It seems a spray of some kind would be great to find. The cases wouldn't be too bad hand rubbing, but the fins...looks daunting...

1981 KZ440 LTD
1982 KZ440 LTD
1974 Honda Trail 90
1982 Honda Express NC50
1982 Honda Trail 110
Electric scooter

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 13:05 #642340 by peter1958
Replied by peter1958 on topic Cleaning aluminum tips needed...
I have used simple green and also some aluminum wheel cleaner in a store that you spray on and rinse off after 15 seconds. But you cant beat doing it by hand. Here is a set of polished aluminum cases. NO I didnt polish them I bought them. Much easyer :lol:
Attachments:

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 13:07 #642341 by peter1958

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 13:34 #642346 by 650ed
Replied by 650ed on topic Cleaning aluminum tips needed...
But they look GREAT and will be easy to maintain. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 14:37 #642355 by martin_csr
Replied by martin_csr on topic Cleaning aluminum tips needed...
For between the fins, a tampico brush might work - the long type that kinda looks like a refrigerator coil brush & typically used to clean spoked wheels (search Amazon.com). Some guys use long strips of blue jeans to do the fins. I guess use either w a polish.

Please Log in or Create an account to join the conversation.

More
01 Aug 2014 16:02 #642370 by !Seymore
Replied by !Seymore on topic Cleaning aluminum tips needed...
A brass brush will not scar or damage aluminum, if not rubbed hard. Anything can damage the fins... I used these, from HF, and air to clean up my 650 fins... oh, and time.

Before:

After:

C.
79' KZ650-D2 [fsm] (Max)
83' KZ750-F1 LTD [clymers] (Kay)
82' KZ1100-D1 Specter (another project)
78' KZ650-B2a (J&H, A Project)
91' KZ1000-P (P = parts)

Please Log in or Create an account to join the conversation.

More
04 Aug 2014 10:11 #642645 by Markovich
Replied by Markovich on topic Cleaniimng aluminum tips needed...
I am not sure how clean you want your fins but I have found that a majority can be cleaned up by using Marvel Mystery Oil on a cloth. Use a small stick or something to get the cloth between the fins. This will take a lot of it off but you can take it further from there and minimize time. That has been my experience. Hope this helps.

1990 KZ1000P, 72k miles, 10 years in storage, new, bars, tires, chain and sprockets, seat, carbs cleaned, police equipement removed.

Please Log in or Create an account to join the conversation.

  • HBKwaka
  • Visitor
04 Aug 2014 10:44 #642646 by HBKwaka
Replied by HBKwaka on topic Cleaning aluminum tips needed...
We used to clean the aluminum floor panels in the hyperbaric(recompression) chamber in the Navy with Coca-Cola. I am dead serious. It will make the aluminum look awesome. Try an area before ya go hog wild. Make sure to rinse well...

Please Log in or Create an account to join the conversation.

More
05 Aug 2014 07:31 - 05 Aug 2014 07:37 #642730 by TimKz44082
Replied by TimKz44082 on topic Cleaning aluminum tips needed...
My engine looks like the photo that Seymour posted. I have an aluminum cleaner (for air conditioners) that will remove all oxidation but leaves the aluminum with a dark grey coating. I'm looking for a chemical spray that can leave the aluminum looking shiny...anyone know of anything like that? I have read about Aluma Brite but have not tried it. It was recommended to me by an old timer bike mechanic. Here is a video of a guy who used air conditioner coil cleaner to clean aluminum...go to about 5:00 minutes and you will see the difference after polishing...


Has anyone tried any of this method (chemical cleaning)?

How long did you soak the aluminum in coca cola?

Or how about this stuff?

1981 KZ440 LTD
1982 KZ440 LTD
1974 Honda Trail 90
1982 Honda Express NC50
1982 Honda Trail 110
Electric scooter
Last edit: 05 Aug 2014 07:37 by TimKz44082.

Please Log in or Create an account to join the conversation.

More
06 Aug 2014 13:44 - 06 Aug 2014 13:48 #642932 by steell
Replied by steell on topic Cleaning aluminum tips needed...
There is no spray on chemical that is going to make aluminum look polished. Polishing is the act of smoothing the surface of the metal, and those spray on cleaners contain acid (Phosphoric acid in Coke) act by removing the top coat of metal and leaving the surface rough.
Polishing is an abrasive process that levels out the peaks and valleys and leaves the surface smooth, AKA polished..
If I can't power polish it, then it gets painted, and if it's polished it still gets painted with the POR-15 clearcoat for aluminum, so no more polishing.

Years ago when I was a lot younger and dumber, I thought it would be fun to be an outlaw trucker. So I bought me a big shiny truck and a big shiny refrigerated trailer, with 18 aluminum wheels, two 150 gallon aluminum fuel tanks, and aluminum battery boxes and steps, all polished.
I paid $150 every two weeks to someone to polish them, that's $300 a month to keep them shiny. I dreamed of a spray on chemical that could polish them. B)

Edit:
Those cleaners are used to clean the metal and remove any corrosion "prior" to polishing. And yes I've tried them all.

KD9JUR
Last edit: 06 Aug 2014 13:48 by steell.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.